Hardware

This script check Cisco firewall (tested on Cisco PIX-515E and ASA-5500). Modules included : ### Mode 1 - Failover ### - fail over status for…

the plugin check with SNMP the state of each ISL and report it to Nagios . Very usefull for SAN. It is finding automatically each…

the plugin check with SNMP the state of each ISL and report it to Nagios

It will be very usefull for the SAN.

If the port channel is down it will return critical. If the speed is 2gb, then it returns ok. If the speed is 1gb, then…

The plugin is a enhanced and modified version of check_cisco.pl from R3dL!GhT. 19.05.2009 - New version. Corrects a minor bug. In case the cache file…

check-packeteer.pl sends HTTP requests to the http://www.packeteer.com Packeteer appliance to read values out of the measurement engine. The plugin makes information available, that could only…

The WebReboot is a product for managing and monitoring equipment in a network installation. The product can be used to power-off, power-on, or reboot "frozen"…

This script check Cisco MSFC (tested on Cisco MSFC 6509 and 6513). Modules included : ### Mode 1 - Modules ### - number of slots…

Run with no parameters to get a usage message. Requires the following perl modules installed (some may already be installed): Getopt::Long; LWP::UserAgent; HTTP::Request::Common qw(POST GET);…

This is a script to check STATUS, CPU, RAM, MSG per Hour, incomming connections, outgoing connections, QUEUE, Work Queue, number of messages in the quarantines,…

check that verifies the status of two controllers, if both are ok (compared against string) output is ok, if one goes by mistake gives warning…