Siemens HiPath 3000 Series check

This plugin checks the following via SNMP: * the overall system state * state of every installed extension card * load level * uptime The first two checks alter the check's result code, 3rd may optionaly alter it too. Uptime is just informational. Some examples: -- without parameters usage is printed and UNKNOWN status returned [root@nagios libexec]# ./check_siemens_hipath Usage: check_siemens_hipath -H hostname_or_ip-address [-C community] [-w load -c load] Usage: check_siemens_hipath -V|--version Usage: check_siemens_hipath --help -- if no community is given, "public" is assumed [root@nagios libexec]# ./check_siemens_hipath --host checked.systems.ip.address -w 10 -c 20 OK - Overall system state(normal); All 12 expansion cards(normal); CPU Load 0% (w/c 10%/20%); Uptime: 62:9:51:35.45 -- if -w and/or -c is ommited or if -c is lower than -w - load level is only informational (no nagios state change) [root@nagios libexec]# ./check_siemens_hipath -H checked.systems.ip.address OK - Overall system state(normal); All 12 expansion cards(normal); CPU Load 0%; Uptime: 62:10:08:26.67 -- "warning" and "minor" state is mapped to WARNING, "major" and "critical" is mapped to CRITICAL [root@nagios libexec]# ./check_siemens_hipath -H checked.systems.ip.address WARNING - Overall system state(minor); Failing expansion cards: HXGM3(minor); CPU Load 0%; Uptime: 62:10:08:26.67 -- bad host or community [root@nagios libexec]# ./check_siemens_hipath --host 192.168.1.2 -C cmnty UNKNOWN - bad host (192.168.1.2) or community string (cmnty) or SNMP not working

You must be logged in to submit a review.

Your review has been submitted and is pending approval.

Your recommendation has been sent.

Project Overview Project Files Project Notes Reviews