Hardware

The only requirement is Perl (because the plugin is written in Perl). The plugin monitors the controller status as reported in /proc/rd/status, and currently only…

You must have installed compaq agents on the compaq servers. Test with compaq smart array 210, compaq smart array 3200, compaq smart array 300 on…

This plugin was basicly tested with the newer tw_cli tool from the 9.2.x code set which supports sysfs. Imho this plugin should work with older…

This plugin checks status on logical and physical drives on a host that have a IBM ServeRAID-card. The plugin is depending on that the dumplog-utility…

This is a nagios plugin to monitor RAID controller and attached disks. Originally written to support LSI SCSI Megaraid cards (sold as Dell PERC3 and…

Some checks require root permission, that is acomplished using sudo. If you call 'check_raid -S' as root it will attempt to add the required lines…

This Nagios plugin will check the follow aspects of a Promise VTrak M200i disk shelf: * the status of each of the physical hard drives;…

This script gets info of a perc6i controller via MegaCli (linux-megacli-2.00.12_1) and if raid is degraded or there are critical or offline physical disks it…

The author of this plugin is: Contact: -------- steve - - - systems & network manager high energy physics university of wisconsin for download-link see…

Apple OS X Servers run a command and control daemon on port 311 which uses XML to send and receive commands and report status. This…

Check the status of PERC5/i RAID controllers (as supplied for RAIDed SAS configurations in Dell PowerEdge 1950 and 2950 servers) using the MegaCli binary.

This plugin check the status of Mylex/LSI 1030 controllers series The LSI snmp agent must be installed on the monitored server. Retreive it on http://www.lsi.com/support/storage/index.html…