sgichk_cisco_chassis

Working Properly. Below is my output. ######################################### ./sgichk_cisco_chassis.pl -H 192.168.1.1 -C public OK: All Environmental Sensors ok Switch#1, Fan#1 = Normal Sw1, PS1 Normal, RPS NotExist = Normal ######################################### ./sgichk_cisco_chassis.pl -H 192.168.1.2 -C public OK: All Environmental Sensors ok chassis = Normal chassis = Normal internal power supply = Normal redundant power supply = notPresent ######################################### ./sgichk_cisco_chassis.pl -H 192.168.1.3 -C public OK: All Environmental Sensors ok Switch#1, Fan#1 = Normal Sw1, PS1 Normal, RPS NotExist = Normal #########################################

Getting it installed was no issue, but when I run the plugin in terminal, I get this: "ERROR fetching Envmon table: The requested table is empty or does not exist" I am using an ASA 5512-X. Does that mean the plugin is not compatible with the device, or have I mis-configured?

Hi all, I can't wait to get this plugin working!, but for some reason (I can't get it working). I am assuming user error as it works via terminal. I set it to be executable, and I get a (Return code of 127 is out of bounds - plugin may be missing) in nagios. I have declared it in switch.cfg as: #cisco Chassis temperature define service{ use generic-service host_name VPU Core service_description Cisco Temps check_command sgichk_cisco_chassis!-C read } I have declared it in commands.cfg as: # 'check_enviro' command definition define command{ command_name sgichk_cisco_chassis command_line $USER1$/sgichk_cisco_chassis! -H $HOSTADDRESS$ $ARG1$ } When I run it via terminal I get: libexec# ./sgichk_cisco_chassis.pl -H 192.168.2.16 -C read OK: All Environmental Sensors ok SW#1, Sensor#1, GREEN = 31 = Normal SW#2, Sensor#1, GREEN = 30 = Normal Switch#1, Fan#1 = Normal Switch#1, Fan#2 = Normal Switch#2, Fan#1 = Normal Sw1, PS1 Normal, RPS NotExist = Normal Sw1, PS2 Normal, RPS NotExist = Normal Sw2, PS1 Normal, RPS NotExist = Normal Sw2, PS2 Normal, RPS NotExist = Normal I am sorry. It looks like a great plugin, I just can't figure out how to get it to work. I would like to get it to report on each switch, in nagios 3.3.1. I don't see any specific documentation on how to use it.