SAN and NAS

check_vnxe

Write a Review

Description:

This plugin allows you to check all components of an EMC VNXe storage system. Requires Unisphere CLI for Linux.

Current Version

1

Last Release Date

2013-10-07

Compatible With

  • Nagios 3.x

Owner

Charles Bender

License

Apache

Copy Page Link Recommend Contact Owner Login to Add to Favorites
Project Files
FileDescription
check_vnxe.sh

The main plugin

Project Photos
Project Notes
This plugin checks EMC VNXe storage system and returns pass/fail result for the components checked. The following components can be checked: ssd ps iomodule dae lcc sp dpe disk mm ccard bat general Please note that this plugin requires that Unisphere CLI is installed on the Nagios server. The verification level for uemcli should be set to low or plugin may fail. Use the setlevel.sh script provided with Unisphere CLI to do this. Additionally, this plugin seems to need to be executed with sudo when Nagios performs the check. The safest way to do this is to add a line that looks like this in your sudoers file- nagios ALL=(ALL) NOPASSWD:/usr/local/nagios/libexec/check_vnxe.sh You will also then need to define the command with sudo in your Nagios config file. Command should look something like this- sudo /usr/local/nagios/libexec/check_vnxe.sh $ARG1$ $ARG2$ $ARG3$ $ARG4$ The reason for this is that Unisphere CLI returns error when executed under Nagios 3.x without sudo. It's possible this will be fixed in future releases of Unisphere CLI, or future versions of Nagios. Please send any comments/feedback to charles@beachcamera.com. Hopefully this plugin will be of use to someone.
Reviews (3) Add a Review
Works Manually but doesn't work through ICINGA
by mohdwazid, May 31, 2020

Issue: It works fine when run manually thorugh command line. But Unknown or no output when ICINGA executes the plugin. Cause: ICINGA is nog able to handle environment vairables. Resolution: Add following lines to check_vnxe.sh and it should work fine. Check ICINGA User shell variables for following values. export HOME= export USER= export USERNAME=


Works fine
by Bret, November 30, 2018

Hi Works fine for me ! It you have a probleme with nagios exec but manual exec is Ok, be sure you allow nagios to execute the script as root into sudoers, for me : nagios ALL= NOPASSWD:/srv/eyesofnetwork/nagios/plugins/check_vnxe.sh (and execute the script with "sudo" on nagios, it should be OK... :)


Nagios GUI shows output (NULL)
by robertw, August 31, 2016

manual check works fine ./check_vnxe.sh 192.168.xxx.xx admin ***** mm OK - no faults detected But Nagios GUI shows output NULL any ideas ?


Add a Review

You must be logged in to submit a review.

Thank you for your review!

Your review has been submitted and is pending approval.

Recommend

To:


From:


Thank you for your recommendation!

Your recommendation has been sent.

Page Sections
Project Overview Project Files Project Photos Project Notes Reviews
Project Stats
Rating
4 (3)
Favorites
0
Views
44,118