Check_eva_cv

Thank you in advance for the plugin, I have the same problem that I first found using check_eva.py. I get some good results (With exit code 0 and well formed output) and some bad ones (with little information and exit code of 3) ----------------------------------------- Command was allways the same: root@nagios:libexec# ./check_eva_cv.sh -H -E -U "myUser" -P "myPass" -C controllers -S /usr/sbin/sssu ----------------------------------------- GOOD OUTPUT: HP Eva: - controllers check. Failed to get host name Failed to get host name Controller 2 - Model: HSV300 - SN: P5512G39SWD06I P5512G39SWD06I - FW: CR2306lep-11300000 OK: Controller 2 Operational state: good OK: Cache State: good Mirror Path 1 NOT Found Mirror Path 2 NOT Found Mirror Port 1 NOT Found Mirror Port 2 NOT Found OK: 2 of 2 Host Ports are in good status OK: 2 of 2 Device Ports are in good status Controller Fans NOT Found Controller Power System NOT Found Failed to get host name Controller 1 - Model: HSV300 - SN: P5512G39SWC02Z P5512G39SWC02Z - FW: CR2306lep-11300000 OK: Controller 1 Operational state: good OK: Cache State: good Mirror Path 1 NOT Found Mirror Path 2 NOT Found Mirror Port 1 NOT Found Mirror Port 2 NOT Found OK: 2 of 2 Host Ports are in good status OK: 2 of 2 Device Ports are in good status Controller Fans NOT Found Controller Power System NOT Found ----------------------------------------- BAD OUTPUT: HP Eva: - controllers check. Failed to get host name Failed to get host name ATTENTION: Controller NOT found ----------------------------------------- Does this ring any bells to you? I am looking forward to reading from you, sebastiaopburnay

This scripts works like a charm! After a few debug with Alberto, I am monitoring EVAs like I never did, is really great.