Check Cisco MPLS / HSRP Router IP’s / States

This Script is capable to check MPLS Routers for their correct Ip's (Active / Passive) by querying them with SNMP and to compare this result with provided Ip's. It is also possible to check for the Standby State of a Router. Check if the Active Router got a specific IP-Address ./check_cisco_hsrp.sh -H 10.35.140.250 -C public -m active 10.35.10.248 OK - Active Router Ip 10.35.140.248 is the correct ip (10.35.10.248) Check if the Standby Router got the correct IP-Address ./check_cisco_hsrp.sh -H 10.35.140.250 -C public -m standby 10.35.140.249 OK - Standby Router Ip 10.35.140.249 is the correct ip (10.35.140.249) Check if the Second (Standby) Router is in Standby State ./check_cisco_hsrp.sh -H 10.35.10.249 -C public -m state 5 OK - 10.35.10.249 is in HSRP State: standby ./check_cisco_hsrp.sh -H 10.35.10.248 -C public -m state 5 CRITICAL - 10.35.140.248 is in HSRP State: Active but should be Standby States: Standby = 5 Active = 6

You must be logged in to submit a review.

Your review has been submitted and is pending approval.

Your recommendation has been sent.

Project Overview Project Notes Reviews