Check Cisco Catalyst

The script has been running perfectly on several Cisco 3750 for a month.
All that time I have been trying to obtain the same information via SNMP from a set of Cisco ESW520 switches, with no success. All interfaces have the same name "Ethernet Interface" and the script returns "Remote device does not return data for XX" when asking for PS, CPU or memory.
Any clue on how to obtain information in Nagios from a ESW520? The command snmpget -v 2c -c CCC IP 1.3.6.1.2.1.2.2.1.8.51 will return the required info, but I don't know how to include that in Nagios.

Works well with:
routers 19xx
routers 29xx - failure on installed redundant PS not failed PS.
Catalyst 3650
Catalyst 4500 - reports fan/PS failure on PS 2 on stack (results in PS/Fan failure)
Router ISR44xx - reports device can't report temp.

vencapany: memory is free so critical should be less than warning. i.e. 20 free vs 10 free.

Hi,

this plugin is amazing and working well! But I have one problem. When I give this command:
./check_cisco_status.pl -H 192.168.1.2 -C public -t mem -w 10 -c 20
Plugin return:
Warning can't be smaller then Critical: 10

Very easy to use, worked right away on an OSSIM box. Does everything it says and the syntax is simple, no need for running after OIDs just to know the CPU Usage and other simple hardware information... Excellent!

Hello,

Thank you for this excellent plugin!

I only saw one problem with counting free memory percentage for values like 800KB or something less. I think that you need to change Bytes to Mega Bytes after calculating percentage value.
So I moved line:
my $mem_free_perc = int(($mem_free / $mem_total) * 100);
above:
$mem_used = int($mem_used / 1024 / 1024);
$mem_free = int($mem_free / 1024 / 1024);
$mem_total = int($mem_total / 1024 / 1024);
And now it works perfect!

Please Posted the command.cfg and service sample file with diffrent SNMP community pls

Using this plugin, i am able to monitor all the required STATE of cisco router & switches. Simply superb.

I have modify some of rows


if("$check_type" ne "temp") {
if($warn > $crit and "$check_type" ne "freeint" and "$check_type" ne "mem") {
print "Warning can't be larger then Critical: $warn > $critn";
FSyntaxError();
} elsif($warn ritical: $warn = $warn) {
$stat = 0;
$msg = "Memory: OK - Free Memory $mem_free_prec%";
} elsif($mem_free_prec $crit) {
$stat = 1;
$msg = "Memory: Warn - Free Memory $mem_free_prec %";
} elsif($mem_free_prec ing for
free memory perc !please valide the change