3PAR check script

This is a good check but fair warning- the power supply check does not return a critical code if it detects an issue there are updated versions elsewhere on the web

Hi, On https://github.com/pgh2011/check_3par there is new version of the script with a fix. Fixed issue when there are more then 150 physical disks. Is works on the commandline but not in the Nagios check. Output when the check via Nagios is started: line 481: 100 - ( ( * 100 ) / ) : syntax error: operand expected (error token is "* 100 ) / ) ") check_3par ERROR: ERROR Wrong command 'check_cap_ssd' .

Hello everybody, on GIT https://github.com/qaxi/nagios-check_3par there is version 5 of the script. there is Quorum Witenes checking for Peer Persitence

Same problem here, 3PAR is stillasking for a password after following succesfully SSH key process

I have completed this well working script with other scripts and some test usefull for us: Check volume : https://exchange.nagios.org/directory/Plugins/Operating-Systems/%2A-Virtual-Environments/VMWare/Check_3par_volume/details check power supply node and check power supply cage and check SSD found upper #!/bin/bash -x # 3PAR Nagios check script v0.3 # Last update 2010/05/14 fredl@3par.com # Last update 2011/03/03 ddu@antemeta.fr # Last update 2016/12/16 yves.vaccarezza@corsedusud.fr # # This script is provided "as is" without warranty of any kind and 3PAR specifically disclaims all implied warranties of merchantability, # non-infringement and fitness for a particular purpose. In no event shall 3PAR have any liability arising out of or related to # customer's 'use of the script including lost data, lost profits, or any direct or indirect, incidental, special, or # consequential damages arising there from. # In addition, 3PAR reserves the right not to perform fixes or updates to this script # # # Usage : check_3par InServ Username Command # # Supported commands # check_pd : Check status of physical disks # Degraded -> Warning # Failed -> Critical # # check_node : Check status of controller nodes # Degraded -> Warning # Failed -> Critical # # check_ld : Check status of logical disks # Degraded -> Warning # Failed -> Critical # # check_vv : Check status of virtual volumes # Degraded -> Warning # Failed -> Critical # # check_port_fc : Check status of virtual volumes # loss_sync -> Warning # config_wait -> Warning # login_wait -> Warning # non_participate -> Warning # error -> Critical # # check_cap_fc : Check used FC capacity # >= $PCWARNINGFC -> Warning # >= $PCCRITICALFC -> Critical # # check_cap_nl : Check used NL capacity # >= $PCWARNINGNL -> Warning # >= $PCCRITICALNL -> Critical # # check_cap_ssd : Check used SSD capacity # >= $PCWARNINGSSD -> Warning # >= $PCCRITICALSSD -> Critical # # check_ps : Check Power Supply Node # Degraded -> Warning # Failed -> Critical # # check_ps_cage : Check Power Supply Cage # Degraded -> Warning # Failed -> Critical # ## check_volume : Check cpacity volume # >= WARNING -> Warning # >= CRITICAL -> Critical # # if [ "$1" == "" ] || [ $2 == "" ] || [ $3 == "" ] then echo Invalid usage : check_3par InServ Username/passwordfile Command exit 3 fi INSERV=$1 USERNAME=$2 COMMAND=$3 VMFS=$4 TMPDIR=/tmp PCCRITICALFC=90 PCWARNINGFC=80 PCCRITICALNL=95 PCWARNINGNL=90 PCWARNINGSSD=90 PCCRITICALSSD=95 CRITICAL=90 WARNING=80 # To connect using the 3PAR CLI, uncomment the following line #CONNECTCOMMAND="/opt/3PAR/inform_cli_2.3.1/bin/cli -sys $INSERV -pwf $USERNAME" # Note : connecting using the CLI requires creating password files (.pwf) # To connect using SSH. uncomment the following line CONNECTCOMMAND="ssh $USERNAME@$INSERV" # Note : connecting using SSH requires setting public key authentication #echo $INSERV $USERNAME $COMMAND >> $TMPDIR/3par_check_log.out if [ $COMMAND == "check_pd" ] then $CONNECTCOMMAND showpd -showcols Id,State -nohdtot > $TMPDIR/3par_$COMMAND.$INSERV.out 2>>$TMPDIR/log.out if [ $? -gt 0 ] then echo Could not connect to InServ $INSERV exit 3 fi if [ `grep -c failed $TMPDIR/3par_$COMMAND.$INSERV.out` -gt 0 ] then echo CRITICAL! The following PDs have abnormal status : `grep -v normal $TMPDIR/3par_$COMMAND.$INSERV.out | tr -d 'n'` rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 2 else if [ `grep -c degraded $TMPDIR/3par_$COMMAND.$INSERV.out` -gt 0 ] then echo WARNING! The following PDs have abnormal status : `grep -v normal $TMPDIR/3par_$COMMAND.$INSERV.out | tr -d 'n'` rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 1 else echo OK : All PDs have normal status rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 0 fi fi fi if [ $COMMAND == "check_node" ] then $CONNECTCOMMAND shownode -s -nohdtot > $TMPDIR/3par_$COMMAND.$INSERV.out if [ $? -gt 0 ] then echo Could not connect to InServ $INSERV exit 3 fi if [ `grep -c -i failed $TMPDIR/3par_$COMMAND.$INSERV.out` -gt 0 ] then echo CRITICAL! The following nodes have abnormal status : `grep -i failed $TMPDIR/3par_$COMMAND.$INSERV.out | tr -s " " | tr -d 'n'` rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 2 else if [ `grep -c -i degraded $TMPDIR/3par_$COMMAND.$INSERV.out` -gt 0 ] then echo WARNING! The following nodes have abnormal status : `grep -i degraded $TMPDIR/3par_$COMMAND.$INSERV.out | tr -s " " | tr -d 'n'` rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 1 else echo OK : All nodes have normal status rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 0 fi fi fi if [ $COMMAND == "check_ps" ] then $CONNECTCOMMAND shownode -ps -nohdtot > $TMPDIR/3par_$COMMAND.$INSERV.out if [ $? -gt 0 ] then echo Could not connect to InServ $INSERV RC=3 fi if [ `grep -c -i failed $TMPDIR/3par_$COMMAND.$INSERV.out` -gt 0 ] then echo CRITICAL! The following Node Power Supply have abnormal status : `grep -i failed $TMPDIR/3par_$COMMAND.$INSERV.out | tr -s " " | tr -d 'n'` rm -f $TMPDIR/3par_$COMMAND.$INSERV.out RC=2 else if [ `grep -c -i degraded $TMPDIR/3par_$COMMAND.$INSERV.out` -gt 0 ] then echo WARNING! The following Node Power Supply have abnormal status : `grep -i degraded $TMPDIR/3par_$COMMAND.$INSERV.out | tr -s " " | tr -d 'n'` rm -f $TMPDIR/3par_$COMMAND.$INSERV.out RC=1 else echo OK : All Power Supply have normal status rm -f $TMPDIR/3par_$COMMAND.$INSERV.out RC=0 fi fi fi if [ $COMMAND == "check_ps_cage" ] then $CONNECTCOMMAND showcage -d > $TMPDIR/3par_$COMMAND.$INSERV.out if [ $? -gt 0 ] then echo Could not connect to InServ $INSERV RC=3 fi if [ `awk '{ if ($0 ~ "------Cage") cage=$5; if ($0 ~ "Failed") print cage" "$0}' $TMPDIR/3par_$COMMAND.$INSERV.out|wc -l` -gt 0 ] then echo CRITICAL! The following cages have abnormal status : `awk '{ if ($0 ~ "------Cage") cage=$5; if ($0 ~ "Failed") print cage" "$0}' $TMPDIR/3par_$COMMAND.$INSERV.out | tr -s " " | tr -d 'n'` rm -f $TMPDIR/3par_$COMMAND.$INSERV.out RC=2 else if [ `awk '{ if ($0 ~ "------Cage") cage=$5; if ($0 ~ "Degraded") print cage" "$0}' $TMPDIR/3par_$COMMAND.$INSERV.out|wc -l` -gt 0 ] then echo WARNING! The following cages have abnormal status : `awk '{ if ($0 ~ "------Cage") cage=$5; if ($0 ~ "Degraded") print cage" "$0}' $TMPDIR/3par_$COMMAND.$INSERV.out | tr -s " " | tr -d 'n'` rm -f $TMPDIR/3par_$COMMAND.$INSERV.out RC=1 else echo OK : All cages have normal status rm -f $TMPDIR/3par_$COMMAND.$INSERV.out RC=0 fi fi fi if [ $COMMAND == "check_vv" ] then $CONNECTCOMMAND showvv -showcols Name,State -notree -nohdtot > $TMPDIR/3par_$COMMAND.$INSERV.out if [ $? -gt 0 ] then echo Could not connect to InServ $INSERV exit 3 fi if [ `grep -c -i failed $TMPDIR/3par_$COMMAND.$INSERV.out` -gt 0 ] then echo CRITICAL! There are failed VVs. Contact 3PAR support rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 2 else if [ `grep -c -i degraded $TMPDIR/3par_$COMMAND.$INSERV.out` -gt 0 ] then echo WARNING! There are degraded VVs. Contact 3PAR support rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 1 else echo OK : All VVs are normal rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 0 fi fi fi if [ $COMMAND == "check_ld" ] then $CONNECTCOMMAND showld -state -nohdtot > $TMPDIR/3par_$COMMAND.$INSERV.out if [ $? -gt 0 ] then echo Could not connect to InServ $INSERV exit 3 fi if [ `grep -c -i failed $TMPDIR/3par_$COMMAND.$INSERV.out` -gt 0 ] then echo CRITICAL! There are failed LDs. Contact 3PAR support rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 2 else if [ `grep -c -i degraded $TMPDIR/3par_$COMMAND.$INSERV.out` -gt 0 ] then echo WARNING! There are degraded LDs. Contact 3PAR support rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 1 else echo OK : All LDs have normal status rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 0 fi fi fi if [ $COMMAND == "check_port_fc" ] then $CONNECTCOMMAND showport -nohdtot > $TMPDIR/3par_$COMMAND.$INSERV.out1 if [ $? -gt 0 ] then echo Could not connect to InServ $INSERV exit 3 fi grep -v -i iscsi $TMPDIR/3par_$COMMAND.$INSERV.out1 | grep -v -i rcip > $TMPDIR/3par_$COMMAND.$INSERV.out rm -f $TMPDIR/3par_$COMMAND.$INSERV.out1 if [ `grep -c -i error $TMPDIR/3par_$COMMAND.$INSERV.out` -gt 0 ] then echo CRITICAL! Some ports are in the error state rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 2 else if [ `grep -c -i loss_sync $TMPDIR/3par_$COMMAND.$INSERV.out` -gt 0 ] || [ `grep -c -i config_wait $TMPDIR/3par_$COMMAND.$INSERV.out` -gt 0 ] || [ `grep -c -i login_wait $TMPDIR/3par_$COMMAND.$INSERV.out` -gt 0 ] || [ `grep -c -i non_participate $TMPDIR/3par_$COMMAND.$INSERV.out` -gt 0 ] then echo WARNING! Some ports are in an abnormal state (loss_sync, config_wait, login_wait or non_participate) rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 1 else echo OK : All FC ports have normal status (ready or offline) rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 0 fi fi fi if [ $COMMAND == "check_cap_fc" ] then $CONNECTCOMMAND showpd -p -devtype FC -showcols Size_MB,Free_MB -csvtable > $TMPDIR/3par_$COMMAND.$INSERV.out if [ $? -gt 0 ] then echo Could not connect to InServ $INSERV exit 3 fi if [ `tail -1 $TMPDIR/3par_$COMMAND.$INSERV.out` = "No PDs listed" ] then echo No FC disks rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 0 fi TOTCAPFC=`cat ${TMPDIR}/3par_${COMMAND}.${INSERV}.out | tail -1 | cut -d, -f1` FREECAPFC=`cat ${TMPDIR}/3par_${COMMAND}.${INSERV}.out | tail -1 | cut -d, -f2` USEDCAPPCFC=`expr 100 - ( ( $FREECAPFC * 100 ) / $TOTCAPFC )` if [ $USEDCAPPCFC -ge $PCCRITICALFC ] then echo CRITICAL! Used FC capacity = $USEDCAPPCFC% ( > $PCCRITICALFC% ) rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 2 else if [ $USEDCAPPCFC -ge $PCWARNINGFC ] then echo WARNING! Used FC capacity = $USEDCAPPCFC% ( > $PCWARNINGFC% ) rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 1 else echo OK : Used FC capacity = $USEDCAPPCFC% rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 0 fi fi fi if [ $COMMAND == "check_cap_nl" ] then $CONNECTCOMMAND showpd -p -devtype NL -showcols Size_MB,Free_MB -csvtable > $TMPDIR/3par_$COMMAND.$INSERV.out if [ $? -gt 0 ] then echo Could not connect to InServ $INSERV exit 3 fi if [ `tail -1 $TMPDIR/3par_$COMMAND.$INSERV.out` = "No PDs listed" ] then echo No NL disks rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 0 fi TOTCAPNL=`cat ${TMPDIR}/3par_${COMMAND}.${INSERV}.out | tail -1 | cut -d, -f1` FREECAPNL=`cat ${TMPDIR}/3par_${COMMAND}.${INSERV}.out | tail -1 | cut -d, -f2` USEDCAPPCNL=`expr 100 - ( ( $FREECAPNL * 100 ) / $TOTCAPNL )` if [ $USEDCAPPCNL -ge $PCCRITICALNL ] then echo CRITICAL! Used NL capacity = $USEDCAPPCNL% ( > $PCCRITICALNL% ) rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 2 else if [ $USEDCAPPCNL -ge $PCWARNINGNL ] then echo WARNING! Used NL capacity = $USEDCAPPCNL% ( > $PCWARNINGNL% ) rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 1 else echo OK : Used NL capacity = $USEDCAPPCNL% rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 0 fi fi fi ##Implementation for SSD Disks if [ $COMMAND == "check_cap_ssd" ] then $CONNECTCOMMAND showpd -p -devtype SSD -showcols Size_MB,Free_MB -csvtable > $TMPDIR/3par_$COMMAND.$INSERV.out if [ $? -gt 0 ] then echo Could not connect to InServ $INSERV exit 3 fi if [ `tail -1 $TMPDIR/3par_$COMMAND.$INSERV.out` = "No PDs listed" ] then echo No SSD disks rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 0 fi TOTCAPSSD=`cat ${TMPDIR}/3par_${COMMAND}.${INSERV}.out | tail -1 | cut -d, -f1` FREECAPSSD=`cat ${TMPDIR}/3par_${COMMAND}.${INSERV}.out | tail -1 | cut -d, -f2` USEDCAPPCSSD=`expr 100 - ( ( $FREECAPSSD * 100 ) / $TOTCAPSSD )` if [ $USEDCAPPCSSD -ge $PCCRITICALSSD ] then echo CRITICAL! Used SSD capacity = $USEDCAPPCSSD% ( > $PCCRITICALSSD% ) rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 2 else if [ $USEDCAPPCSSD -ge $PCWARNINGSSD ] then echo WARNING! Used SSD capacity = $USEDCAPPCSSD% ( > $PCWARNINGSSD% ) rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 1 else echo OK : Used SSD capacity = $USEDCAPPCSSD% rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 0 fi fi fi if [ $COMMAND == "check_3par_volume" ] then $CONNECTCOMMAND showvv -csvtable > $TMPDIR/3par_$COMMAND.$INSERV.out if [ $? -gt 0 ] then echo Could not connect to 3PAR $INSERV exit 3 fi VSIZE=`cat ${TMPDIR}/3par_${COMMAND}.${INSERV}.out | grep ${VMFS} | cut -d, -f12` VSIZE_Gb=`expr ( $VSIZE / 1024 )` USED=`cat ${TMPDIR}/3par_${COMMAND}.${INSERV}.out | grep ${VMFS} | cut -d, -f11` USED_Gb=`expr ( $USED / 1024 )` FREE=`expr ( $VSIZE - $USED )` FREE_Gb=`expr ( $FREE / 1024 )` FREEPERCENT=`expr 100 - ( ( $USED * 100 ) / $VSIZE )` USEDPERCENT=`expr 100 - ( $FREEPERCENT )` WARNCRAW=$(($VSIZE*$WARNING/100)) WARNCRAW_Gb=`expr ( $WARNCRAW / 1024 )` CRITCCRAW=$(($VSIZE*$CRITICAL/100)) CRITCCRAW_Gb=`expr ( $CRITCCRAW / 1024 )` if [ $USED_Gb -ge $CRITCCRAW_Gb ] then echo CRITICAL! TOTAL: $VSIZEMb USED: $USEDMb ($USED-PERCENT%) FREE: $FREEMb ($FREE-PERCENT) TotSize=$VSIZE_GbGb Used=$USED_GbGb,Seuil Warn Used : $WARNCRAW_Gb Gb,Seuil Used Crit : $CRITCCRAW_GbGb rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 2 else if [ $USED_Gb -ge $WARNCRAW_Gb ] then echo WARNING! TOTAL: $VSIZEMb USED: $USEDMb ($USED-PERCENT%) FREE: $FREEMb ($FREE-PERCENT) TotSize=$VSIZE_GbGb Used=$USED_GbGb,Seuil Warn Used : $WARNCRAW_GbGb,Seuil Crit Used : $CRITCCRAW_GbGb rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 1 else echo OK : TOTAL: $VSIZEMb USED: $USEDMb ($USEDPERCENT%) FREE: $FREEMb ($FREEPERCENT%) TotSize=$VSIZE_GbGb Used=$USED_GbGb,Seuil Warn Used : $WARNCRAW_GbGb,Seuil Crit Used : $CRITCCRAW_GbGb rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 0 fi fi fi

If you want to have an error if the ssh connection is not working and ask the password to nagios add this parameter at the end of the ssh command: -qo PasswordAuthentication=no CONNECTCOMMAND="ssh $USERNAME@$INSERV -qo PasswordAuthentication=no"

I did all what you say, and everything was good, but when I try to connect to 3Par it still ask me for password. I tried with root and nagios but always the same problem.

Works fine in Nagios 3, I used the SSH connection. When in the instructions it says: "Log in to the server with the 'nagios' user" I did (as root): # su - nagios -s /bin/bash because my nagios user didn't have shell.

In case someone is interested. Not perfect, but it does the job. https://github.com/pashol/nagios-checks/blob/master/check_3par_perf if [ $COMMAND == "check_cap_fc" ] then $CONNECTCOMMAND showpd -p -devtype FC -showcols Size_MB,Free_MB -csvtable > $TMPDIR/3par_$COMMAND.$INSERV.out if [ $? -gt 0 ] then echo Could not connect to InServ $INSERV exit 3 fi if [ `tail -1 $TMPDIR/3par_$COMMAND.$INSERV.out` = "No PDs listed" ] then echo No FC disks rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 0 fi TOTCAPFC=`cat ${TMPDIR}/3par_${COMMAND}.${INSERV}.out | tail -1 | cut -d, -f1` FREECAPFC=`cat ${TMPDIR}/3par_${COMMAND}.${INSERV}.out | tail -1 | cut -d, -f2` USEDCAPPCFC=`expr 100 - ( ( $FREECAPFC * 100 ) / $TOTCAPFC )` USEDCAPFC=$((($TOTCAPFC-$FREECAPFC))) WARNCAPFCRAW=$(($TOTCAPFC*$PCWARNINGFC/100)) CRITCAPFCRAW=$(($TOTCAPFC*$PCCRITICALFC/100)) if [ $USEDCAPPCFC -ge $PCCRITICALFC ] then echo CRITICAL! Used FC capacity = $USEDCAPPCFC% ( > $PCCRITICALFC% )|UsedSpace=$USEDCAPPCFC%;$PCWARNINGFC;$PCCRITICALFC UsedSpace=$USEDCAPFCMB;$WARNCAPFCRAW;$CRITCAPFCRAW;0;$TOTCAPFC rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 2 else if [ $USEDCAPPCFC -ge $PCWARNINGFC ] then echo WARNING! Used FC capacity = $USEDCAPPCFC% ( > $PCWARNINGFC% )|UsedSpace=$USEDCAPPCFC%;$PCWARNINGFC;$PCCRITICALFC UsedSpace=$USEDCAPFCMB;$WARNCAPFCRAW;$CRITCAPFCRAW;0;$TOTCAPFC rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 1 else echo OK : Used FC capacity = $USEDCAPPCFC%|UsedSpace=$USEDCAPPCFC%;$PCWARNINGFC;$PCCRITICALFC UsedSpace=$USEDCAPFCMB;$WARNCAPFCRAW;$CRITCAPFCRAW;0;$TOTCAPFC rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 0 fi fi fi

Error: Service check command 'check_3par_cap_fc' specified in service 'FC disks capacity' for host 'ieat3par-01' not defined anywhere!

I'm not a linux expert but found the instructions really easy to follow The check is great and monitors everything successfully. One little bug I found was that the power supply check does not return "UNKNOWN" when it is unable to connect to the 3PAR, all the other checks are able to do this...

##Implementation for SSD Disks ##NOTE: Add PCWARNINGSSD = 80 and PCCRITICALSSD = 90 to trashold data. if [ $COMMAND == "check_cap_ssd" ] then $CONNECTCOMMAND showpd -p -devtype SSD -showcols Size_MB,Free_MB -csvtable > $TMPDIR/3par_$COMMAND.$INSERV.out if [ $? -gt 0 ] then echo Could not connect to InServ $INSERV exit 3 fi if [ `tail -1 $TMPDIR/3par_$COMMAND.$INSERV.out` = "No PDs listed" ] then echo No SSD disks rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 0 fi TOTCAPSSD=`cat ${TMPDIR}/3par_${COMMAND}.${INSERV}.out | tail -1 | cut -d, -f1` FREECAPSSD=`cat ${TMPDIR}/3par_${COMMAND}.${INSERV}.out | tail -1 | cut -d, -f2` USEDCAPPCSSD=`expr 100 - ( ( $FREECAPSSD * 100 ) / $TOTCAPSSD )` if [ $USEDCAPPCSSD -ge $PCCRITICALSSD ] then echo CRITICAL! Used SSD capacity = $USEDCAPPCSSD% ( > $PCCRITICALSSD% ) rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 2 else if [ $USEDCAPPCSSD -ge $PCWARNINGSSD ] then echo WARNING! Used SSD capacity = $USEDCAPPCSSD% ( > $PCWARNINGSSD% ) rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 1 else echo OK : Used SSD capacity = $USEDCAPPCSSD% rm -f $TMPDIR/3par_$COMMAND.$INSERV.out exit 0 fi fi fi

I have just installed 3par check plugin for Nagios and it's working excellent ! Very easy to implement using installation guide provided.