Linux
check_md_raid
Description:
Check all active software raid arrays on a Linux server.
Current Version
Last Release Date
June 16, 2009
Compatible With
Owner
Meet The New Nagios Core Services Platform
Built on over 25 years of monitoring experience, the Nagios Core Services Platform provides insightful monitoring dashboards, time-saving monitoring wizards, and unmatched ease of use. Use it for free indefinitely.
Monitoring Made Magically Better
- Nagios Core on Overdrive
- Powerful Monitoring Dashboards
- Time-Saving Configuration Wizards
- Open Source Powered Monitoring On Steroids
- And So Much More!
Project Files
| File | Description |
|---|---|
| check_md_raid | check_md_raid |
Project Notes
Simple shell script that reads /proc/mdstat and creates some status according to that files content.
Unlike other scripts found here this script does not need any root access to mdadm.
Just start it, the script doesn't need any arguments.
Reviews
(4)
Add a Review
Hi, here's my version that works on my config, i changed some deprecated commands:
#!/bin/bash
#
# Created by Sebastian Grewe, Jammicron Technology
#
# Get count of raid arrays
RAID_DEVICES=$(grep ^md -c /proc/mdstat)
# Get count of degraded arrays
#RAID_STATUS=`grep "[.*_.*]" /proc/mdstat -c`
RAID_STATUS=$(grep -E "[.*(=|>|.).*]" /proc/mdstat -c)
# Is an array currently recovering, get percentage of recovery
RAID_RECOVER=$(grep recovery /proc/mdstat | awk '{print $4}')
RAID_RESYNC=$(grep resync /proc/mdstat | awk '{print $4}')
RAID_CHECK=$(grep check /proc/mdstat | awk '{print $4}')
# Check raid status
# RAID recovers --> Warning
if [ -n "${RAID_RECOVER}" ]; then
#if [[ $RAID_RECOVER ]]; then
STATUS="WARNING - Checked $RAID_DEVICES arrays, recovering : $RAID_RECOVER"
EXIT=1
elif [ -n "${RAID_RESYNC}" ]; then
STATUS="WARNING - Checked $RAID_DEVICES arrays, resync : $RAID_RESYNC"
EXIT=1
elif [ -n "${RAID_CHECK}" ]; then
STATUS="OK - Checked $RAID_DEVICES arrays, check : $RAID_CHECK"
EXIT=0
# RAID ok
elif [ -n "${RAID_STATUS}" = "0" ]; then
STATUS="OK - Checked $RAID_DEVICES arrays."
EXIT=0
# All else critical, better save than sorry
else
EXTEND_RAID_STATUS=$(grep -E "[.*(=|>|.|_).*]" /proc/mdstat | awk '{print $2}' | uniq -c | xargs echo)
STATUS="WARNING- Checked $RAID_DEVICES arrays, $RAID_STATUS have failed check: $EXTEND_RAID_STATUS "
EXIT=1
fi
# Status and quit
echo "$STATUS"
exit $EXIT
#!/bin/bash
#
# Created by Sebastian Grewe, Jammicron Technology
#
# Get count of raid arrays
RAID_DEVICES=$(grep ^md -c /proc/mdstat)
# Get count of degraded arrays
#RAID_STATUS=`grep "[.*_.*]" /proc/mdstat -c`
RAID_STATUS=$(grep -E "[.*(=|>|.).*]" /proc/mdstat -c)
# Is an array currently recovering, get percentage of recovery
RAID_RECOVER=$(grep recovery /proc/mdstat | awk '{print $4}')
RAID_RESYNC=$(grep resync /proc/mdstat | awk '{print $4}')
RAID_CHECK=$(grep check /proc/mdstat | awk '{print $4}')
# Check raid status
# RAID recovers --> Warning
if [ -n "${RAID_RECOVER}" ]; then
#if [[ $RAID_RECOVER ]]; then
STATUS="WARNING - Checked $RAID_DEVICES arrays, recovering : $RAID_RECOVER"
EXIT=1
elif [ -n "${RAID_RESYNC}" ]; then
STATUS="WARNING - Checked $RAID_DEVICES arrays, resync : $RAID_RESYNC"
EXIT=1
elif [ -n "${RAID_CHECK}" ]; then
STATUS="OK - Checked $RAID_DEVICES arrays, check : $RAID_CHECK"
EXIT=0
# RAID ok
elif [ -n "${RAID_STATUS}" = "0" ]; then
STATUS="OK - Checked $RAID_DEVICES arrays."
EXIT=0
# All else critical, better save than sorry
else
EXTEND_RAID_STATUS=$(grep -E "[.*(=|>|.|_).*]" /proc/mdstat | awk '{print $2}' | uniq -c | xargs echo)
STATUS="WARNING- Checked $RAID_DEVICES arrays, $RAID_STATUS have failed check: $EXTEND_RAID_STATUS "
EXIT=1
fi
# Status and quit
echo "$STATUS"
exit $EXIT
Hi,
I added another status for state "check" which is OK (0), and dumps the % complete.
############
[root@stack2 bin]# ./check_md_raid
OK - Checked 1 arrays, check : 0.4%
############
[root@stack2 bin]# more ./check_md_raid
#!/bin/bash
#
# Created by Sebastian Grewe, Jammicron Technology
#
# Get count of raid arrays
RAID_DEVICES=`grep ^md -c /proc/mdstat`
# Get count of degraded arrays
#RAID_STATUS=`grep "[.*_.*]" /proc/mdstat -c`
RAID_STATUS=`egrep "[.*(=|>|.).*]" /proc/mdstat -c`
# Is an array currently recovering, get percentage of recovery
RAID_RECOVER=`grep recovery /proc/mdstat | awk '{print $4}'`
RAID_RESYNC=`grep resync /proc/mdstat | awk '{print $4}'`
RAID_CHECK=`grep check /proc/mdstat | awk '{print $4}'`
# Check raid status
# RAID recovers --> Warning
if [[ $RAID_RECOVER ]]; then
STATUS="WARNING - Checked $RAID_DEVICES arrays, recovering : $RAID_RECOVER"
EXIT=1
elif [[ $RAID_RESYNC ]]; then
STATUS="WARNING - Checked $RAID_DEVICES arrays, resync : $RAID_RESYNC"
EXIT=1
elif [[ $RAID_CHECK ]]; then
STATUS="OK - Checked $RAID_DEVICES arrays, check : $RAID_CHECK"
EXIT=0
# RAID ok
elif [[ $RAID_STATUS == "0" ]]; then
STATUS="OK - Checked $RAID_DEVICES arrays."
EXIT=0
# All else critical, better save than sorry
else
EXTEND_RAID_STATUS=`egrep "[.*(=|>|.|_).*]" /proc/mdstat | awk '{print $2}' | uniq -c | xargs echo`
STATUS="WARNING- Checked $RAID_DEVICES arrays, $RAID_STATUS have failed check: $EXTEND_RAID_STATUS "
EXIT=1
fi
# Status and quit
echo $STATUS
exit $EXIT
I added another status for state "check" which is OK (0), and dumps the % complete.
############
[root@stack2 bin]# ./check_md_raid
OK - Checked 1 arrays, check : 0.4%
############
[root@stack2 bin]# more ./check_md_raid
#!/bin/bash
#
# Created by Sebastian Grewe, Jammicron Technology
#
# Get count of raid arrays
RAID_DEVICES=`grep ^md -c /proc/mdstat`
# Get count of degraded arrays
#RAID_STATUS=`grep "[.*_.*]" /proc/mdstat -c`
RAID_STATUS=`egrep "[.*(=|>|.).*]" /proc/mdstat -c`
# Is an array currently recovering, get percentage of recovery
RAID_RECOVER=`grep recovery /proc/mdstat | awk '{print $4}'`
RAID_RESYNC=`grep resync /proc/mdstat | awk '{print $4}'`
RAID_CHECK=`grep check /proc/mdstat | awk '{print $4}'`
# Check raid status
# RAID recovers --> Warning
if [[ $RAID_RECOVER ]]; then
STATUS="WARNING - Checked $RAID_DEVICES arrays, recovering : $RAID_RECOVER"
EXIT=1
elif [[ $RAID_RESYNC ]]; then
STATUS="WARNING - Checked $RAID_DEVICES arrays, resync : $RAID_RESYNC"
EXIT=1
elif [[ $RAID_CHECK ]]; then
STATUS="OK - Checked $RAID_DEVICES arrays, check : $RAID_CHECK"
EXIT=0
# RAID ok
elif [[ $RAID_STATUS == "0" ]]; then
STATUS="OK - Checked $RAID_DEVICES arrays."
EXIT=0
# All else critical, better save than sorry
else
EXTEND_RAID_STATUS=`egrep "[.*(=|>|.|_).*]" /proc/mdstat | awk '{print $2}' | uniq -c | xargs echo`
STATUS="WARNING- Checked $RAID_DEVICES arrays, $RAID_STATUS have failed check: $EXTEND_RAID_STATUS "
EXIT=1
fi
# Status and quit
echo $STATUS
exit $EXIT
Yet I changed some lines, making this script more useful for our environment, from the last review.
Next step would be to parse the raid status, but so far I got the messages listed below, so this is how far my script could go.
Cheers!
[======>..............] check = 34.7% (72921088/209711382) finish=6891.0min speed=330K/sec
[========>............] check = 43.7% (91719680/209711382) finish=480.0min speed=4096K/sec
#!/bin/bash
#
# Created by Sebastian Grewe, Jammicron Technology
#
# Get count of raid arrays
RAID_DEVICES=`grep ^md -c /proc/mdstat`
# Get count of degraded arrays
#RAID_STATUS=`grep "[.*_.*]" /proc/mdstat -c`
RAID_STATUS=`egrep "[.*(=|>|.).*]" /proc/mdstat -c`
# Is an array currently recovering, get percentage of recovery
RAID_RECOVER=`grep recovery /proc/mdstat | awk '{print $4}'`
RAID_RESYNC=`grep resync /proc/mdstat | awk '{print $4}'`
# Check raid status
# RAID recovers --> Warning
if [[ $RAID_RECOVER ]]; then
STATUS="WARNING - Checked $RAID_DEVICES arrays, recovering : $RAID_RECOVER"
EXIT=1
elif [[ $RAID_RESYNC ]]; then
STATUS="WARNING - Checked $RAID_DEVICES arrays, resync : $RAID_RESYNC"
EXIT=1
# RAID ok
elif [[ $RAID_STATUS == "0" ]]; then
STATUS="OK - Checked $RAID_DEVICES arrays."
EXIT=0
# All else critical, better save than sorry
else
EXTEND_RAID_STATUS=`egrep "[.*(=|>|.|_).*]" /proc/mdstat | awk '{print $2}' | uniq -c | xargs echo`
STATUS="WARNING- Checked $RAID_DEVICES arrays, $RAID_STATUS have failed check: $EXTEND_RAID_STATUS "
EXIT=1
fi
# Status and quit
echo $STATUS
exit $EXIT
Next step would be to parse the raid status, but so far I got the messages listed below, so this is how far my script could go.
Cheers!
[======>..............] check = 34.7% (72921088/209711382) finish=6891.0min speed=330K/sec
[========>............] check = 43.7% (91719680/209711382) finish=480.0min speed=4096K/sec
#!/bin/bash
#
# Created by Sebastian Grewe, Jammicron Technology
#
# Get count of raid arrays
RAID_DEVICES=`grep ^md -c /proc/mdstat`
# Get count of degraded arrays
#RAID_STATUS=`grep "[.*_.*]" /proc/mdstat -c`
RAID_STATUS=`egrep "[.*(=|>|.).*]" /proc/mdstat -c`
# Is an array currently recovering, get percentage of recovery
RAID_RECOVER=`grep recovery /proc/mdstat | awk '{print $4}'`
RAID_RESYNC=`grep resync /proc/mdstat | awk '{print $4}'`
# Check raid status
# RAID recovers --> Warning
if [[ $RAID_RECOVER ]]; then
STATUS="WARNING - Checked $RAID_DEVICES arrays, recovering : $RAID_RECOVER"
EXIT=1
elif [[ $RAID_RESYNC ]]; then
STATUS="WARNING - Checked $RAID_DEVICES arrays, resync : $RAID_RESYNC"
EXIT=1
# RAID ok
elif [[ $RAID_STATUS == "0" ]]; then
STATUS="OK - Checked $RAID_DEVICES arrays."
EXIT=0
# All else critical, better save than sorry
else
EXTEND_RAID_STATUS=`egrep "[.*(=|>|.|_).*]" /proc/mdstat | awk '{print $2}' | uniq -c | xargs echo`
STATUS="WARNING- Checked $RAID_DEVICES arrays, $RAID_STATUS have failed check: $EXTEND_RAID_STATUS "
EXIT=1
fi
# Status and quit
echo $STATUS
exit $EXIT
#!/bin/bash
#
# Created by Sebastian Grewe, Jammicron Technology
#
# Get count of raid arrays
RAID_DEVICES=`grep ^md -c /proc/mdstat`
# Get count of degraded arrays
RAID_STATUS=`grep "[.*_.*]" /proc/mdstat -c`
# Is an array currently recovering, get percentage of recovery
RAID_RECOVER=`grep recovery /proc/mdstat | awk '{print $4}'`
RAID_RESYNC=`grep resync /proc/mdstat | awk '{print $4}'`
# Check raid status
# RAID recovers --> Warning
if [[ $RAID_RECOVER ]]; then
STATUS="WARNING - Checked $RAID_DEVICES arrays, recovering : $RAID_RECOVER"
EXIT=1
elif [[ $RAID_RESYNC ]]; then
STATUS="WARNING - Checked $RAID_DEVICES arrays, resync : $RAID_RESYNC"
EXIT=1
# RAID ok
elif [[ $RAID_STATUS == "0" ]]; then
STATUS="OK - Checked $RAID_DEVICES arrays."
EXIT=0
# All else critical, better save than sorry
else
STATUS="CRITICAL - Checked $RAID_DEVICES arrays, $RAID_STATUS have FAILED"
EXIT=2
fi
# Status and quit
echo $STATUS
exit $EXIT
#
# Created by Sebastian Grewe, Jammicron Technology
#
# Get count of raid arrays
RAID_DEVICES=`grep ^md -c /proc/mdstat`
# Get count of degraded arrays
RAID_STATUS=`grep "[.*_.*]" /proc/mdstat -c`
# Is an array currently recovering, get percentage of recovery
RAID_RECOVER=`grep recovery /proc/mdstat | awk '{print $4}'`
RAID_RESYNC=`grep resync /proc/mdstat | awk '{print $4}'`
# Check raid status
# RAID recovers --> Warning
if [[ $RAID_RECOVER ]]; then
STATUS="WARNING - Checked $RAID_DEVICES arrays, recovering : $RAID_RECOVER"
EXIT=1
elif [[ $RAID_RESYNC ]]; then
STATUS="WARNING - Checked $RAID_DEVICES arrays, resync : $RAID_RESYNC"
EXIT=1
# RAID ok
elif [[ $RAID_STATUS == "0" ]]; then
STATUS="OK - Checked $RAID_DEVICES arrays."
EXIT=0
# All else critical, better save than sorry
else
STATUS="CRITICAL - Checked $RAID_DEVICES arrays, $RAID_STATUS have FAILED"
EXIT=2
fi
# Status and quit
echo $STATUS
exit $EXIT
Add a Review
You must be logged in to submit a review.
Thank you for your review!
Your review has been submitted and is pending approval.
Recommend
To:
From:
Thank you for your recommendation!
Your recommendation has been sent.
Page Sections
Project Stats
Rating
4.5 (4)
Favorites
1
Views
183,193