Liebert

Check Liebert NXR-UPS (30kVA)

Write a Review

Description:

Use with Liebert NXR-UPS. Tested on our 30kVA UPS type. No MIB needed.

Current Version

1.0

Last Release Date

2014-06-08

Compatible With

  • Nagios 3.x
  • Nagios 4.x
  • Nagios XI

Owner

Nguyen Duc Trung Dung

Website

http://www.cloudarch.club

License

GPL

Copy Page Link Recommend Contact Owner Login to Add to Favorites Login to Claim
Project Files
FileDescription
Liebert_NXR_UPS.py
Project Photos
Project Notes
I only active alert and perf data on UPS Battery temperature, Output load, System status. If anyone need more alert and more perf data, feel free to edit the script and adjust features, have guide inside. ------------------------------------------------- Options: -h, --help show this help message and exit -H HOST, --host=HOST hostname or IP address -c COMMUNITY SNMP community -t TYPE, --type=TYPE BATTERY VOLTAGE, BATTERY CURRENT, BATTERY STATUS, SYSTEM STATUS, INPUT, OUTPUT -m MODULE, --module=MODULE module to check -a RANGE, --range=RANGE normal range, when something out of scope alert will be raised. Ex: -a 0,80 I saw many ask about what is the module? - On LiebertUPS module mean the UPS electronic part installed on it. So by default this UPS included with 1 module then use this command: ./Liebert_NXR_UPS.py -H xxx -c zzz -t yyy -m 1
Reviews (2) Add a Review
ERROR - Timeout: No response from 192.168.11.109
by Keska, September 30, 2019
Hi,
I have Liebert NXC 20KVA and I want monitor this UPS by nagios.
I tried this command:
./Liebert_NXR_UPS.py -H 192.168.11.109 -c v1 -m 1 -t 'BATTERY CURRENT'
and i have answer:
ERROR - Timeout: No Response from 192.168.11.109.
I enabled SNMP v1 on UPS
can you tell me what I doing wrong?
Helpful?    
Report
I can't get anything back from our NXb
by mark8adams, November 30, 2016
I don't have enough information to know whether this works or not. I only get a couple of error messages when I run the plugin:
You must specify module number
or
Not supported check TYPE
or
Traceback (most recent call last):
File "./check_Liebert_NXR_UPS.py", line 200, in
PARSER(opts.host, opts.community, opts.module, opts.type, opts.range).main()
File "./check_Liebert_NXR_UPS.py", line 170, in main
base_oid = self.count_enemy()
File "./check_Liebert_NXR_UPS.py", line 121, in count_enemy
blood, tmp = self.first_blood(oid)
File "./check_Liebert_NXR_UPS.py", line 76, in first_blood
raw_data.append(float(tmp[i])) # Save raw data
ValueError: invalid literal for float(): No Such Object available on this agent at this O.ID
...
It seems the plugin is looking in the wrong place for data,
self.module_base_oid = '.1.3.6.1.4.1.13400.2.19.2.
versus
.1.3.6.1.4.1.476.1.42.2.

Can you point me in the right direction?
Thanks,
Mark
Owner's Reply:

Hi, the module is mean for a battery installed on your UPS. This model has many module slots so you must specify the module slot for it to check in example module "1".

And beware this script is written only for this model only. You can not use it with other model of Liebert UPS they have very different SNMP structure

0 of 1 found this review helpful.
Helpful?    1
Report
Add a Review

You must be logged in to submit a review.

Thank you for your review!

Your review has been submitted and is pending approval.

Recommend

To:


From:


Thank you for your recommendation!

Your recommendation has been sent.

Page Sections
Project Overview Project Files Project Photos Project Notes Reviews
Project Stats
Rating
3 (2)
Favorites
0
Views
27,058