Tape Drives and Libraries

check_tl_health

Write a Review

Description:

check_tl_health is a universal plugin which is used to monitor tape libraries. Up to now it can be used for HP StoreEver MSL4048, Quantum i40 and i80. The plan is to support more and more devices.

Current Version

1.1

Last Release Date

2013-10-08

Compatible With

  • Nagios 1.x
  • Nagios 2.x
  • Nagios 3.x
  • Nagios XI

Owner

Gerhard Lausser

Website

http://labs.consol.de/nagios/check_tl_health/

Download URL

http://labs.consol.de/nagios/check_tl_health/

License

GPL

Copy Page Link Recommend Login to Add to Favorites Login to Claim
Nagios CSP

Meet The New Nagios Core Services Platform

Built on over 25 years of monitoring experience, the Nagios Core Services Platform provides insightful monitoring dashboards, time-saving monitoring wizards, and unmatched ease of use. Use it for free indefinitely.

Download Now

Monitoring Made Magically Better

  • Nagios Core on Overdrive
  • Powerful Monitoring Dashboards
  • Time-Saving Configuration Wizards
  • Open Source Powered Monitoring On Steroids
  • And So Much More!
Project Notes
Usage: check_tl_health [ -v|--verbose ] [ -t ] --mode --hostname --community ...] -?, --usage Print usage information -h, --help Print detailed help screen -V, --version Print version information -t, --timeout=INTEGER Seconds before plugin times out (default: 15) -v, --verbose Show details for command-line debugging (can repeat up to 3 times) --blacklist Blacklist some (missing/failed) components --hostname Hostname or IP-address of the switch or router --port The SNMP port to use (default: 161) --domain The transport domain to use (default: udp/ipv4, other possible values: udp6, udp/ipv6, tcp, tcp4, tcp/ipv4, tcp6, tcp/ipv6) --protocol The SNMP protocol to use (default: 2c, other possibilities: 1,3) --community SNMP community of the server (SNMP v1/2 only) --username The securityName for the USM security model (SNMPv3 only) --authpassword The authentication password for SNMPv3 --authprotocol The authentication protocol for SNMPv3 (md5|sha) --privpassword The password for authPriv security level --privprotocol The private protocol for SNMPv3 (des|aes|aes128|3des|3desde) --warning The warning threshold --mode A keyword which tells the plugin what to do uptime (Check the uptime of the device) hardware-health (Check the status of environmental equipment (fans, temperatures, power)) cpu-load (Check the CPU load of the device) memory-usage (Check the memory usage of the device) interface-usage (Check the utilization of interfaces) interface-errors (Check the error-rate of interfaces (errors+discards per sec)) interface-status (Check the status of interfaces) list-interfaces (Show the interfaces of the device and update the name cache) list-interfaces-detail (Show the interfaces of the device and some details) interface-availability (Show the availability (oper != up) of interfaces) link-aggregation-availability (Check the percentage of up interfaces in a link aggregation) create-shinken-service (Create a Shinken service definition) ha-role (Check the role in a ha group) check-licenses (Check the installed licences/keys) walk (Show snmpwalk command with the oids necessary for a simulation) --name The name of an interface (ifDescr) --alias The alias name of a 64bit-interface (ifAlias) --regexp A flag indicating that --name is a regular expression --ifspeedin Override the ifspeed oid of an interface (only inbound) --ifspeedout Override the ifspeed oid of an interface (only outbound) --ifspeed Override the ifspeed oid of an interface --units One of %, B, KB, MB, GB, Bit, KBi, MBi, GBi. (used for e.g. mode interface-usage) --role The role of this device in a hsrp group (active/standby/listen) --report Can be used to shorten the output --lookback The amount of time you want to look back when calculating average rates. Use it for mode interface-errors or interface-usage. Without --lookback the time between two runs of check_tl_health is the base for calculations. If you want your checkresult to be based for example on the past hour, use --lookback 3600. --critical The critical threshold --mitigation The parameter allows you to change a critical error to a warning. --servertype The type of the network device: cisco (default). Use it if auto-detection is not possible --statefilesdir An alternate directory where the plugin can save files --snmpwalk A file with the output of a snmpwalk (used for simulation) Use it instead of --hostname --oids A list of oids which are downloaded and written to a cache file. Use it together with --mode oidcache --offline The maximum number of seconds since the last update of cache file before it is considered too old --multiline Multiline output
Reviews (1) Add a Review
Excellent, worked with MSL 2024 too
by eduardohki, March 31, 2016
Tested also with MSL 2024, works fine!
Helpful?    
Report
Add a Review

You must be logged in to submit a review.

Thank you for your review!

Your review has been submitted and is pending approval.

Recommend

To:


From:


Thank you for your recommendation!

Your recommendation has been sent.

Page Sections
Project Overview Project Notes Reviews
Project Stats
Rating
5 (1)
Favorites
0
Views
34,727