Build precise queries to find exactly what you need
Press ESC to close
Join our next live webinar: “Advanced Nagios Monitoring Techniques” – Register Now
Your review has been submitted and is pending approval.
check_linksys.pl checks Linksys networking hardware via SNMP. It counts ethernet interfaces and reports how many of them are up or down. Also shows the system description and uptime if you want. There’s a spec file in the archive if you want to build an RPM.
Current Version
Last Release Date
June 11, 2009
Owner
Nagios Exchange
Compatible With
check_linksys.pl - perl source code
check_linksys.spec - spec file to build a rpm
Nagios-Check Plugin for Linksys Router and Switches. Will check a Linksys Router or Switch using SNMP. Developed to check Linksys hardware but may be usefull for network hardware in general. honors the following options: -e|--ethernetinterfaces Check if RFC1213-MIB::ifType is ethernet-csmacd(6) and RFC1213-MIB::ifOperStatus is up(1) or down(2). Counts and print the results. -u|--uptime Print DISMAN-EVENT-MIB::sysUpTimeInstance as human readable string. For example: 7 days, 0:07:13.00 up -d|--description Print RFC1213-MIB::sysDescr.0 as string. For example: [24-Port Managed 10/100 Switch w/WebView]
You must be logged in to submit a review.
To:
From: