Cisco
check_snmp_wlc_ap
Description:
Nagios check in python review the number of APs associated to a Cisco Wlan Controller using snmp and trigger alarms if less than critical or warning threshold.
Current Version
1.0
Last Release Date
2018-01-05
Compatible With
- Nagios 4.x
- Nagios XI
Owner
Meet The New Nagios Core Services Platform
Built on over 25 years of monitoring experience, the Nagios Core Services Platform provides insightful monitoring dashboards, time-saving monitoring wizards, and unmatched ease of use. Use it for free indefinitely.
Monitoring Made Magically Better
- Nagios Core on Overdrive
- Powerful Monitoring Dashboards
- Time-Saving Configuration Wizards
- Open Source Powered Monitoring On Steroids
- And So Much More!
Project Files
| File | Description |
|---|---|
| check_snmp_wlc_ap |
Project Notes
Nagios check in python to fetch by snmpwalk Cisco OID related to AP and trigger alarm based on it.
OID is 1.3.6.1.4.1.9.9.618.1.8.4.0 which is "Connected AP's".
It is tested on Cisco 5508 with 8.2.166.0. You do not need specific MIB.
I have tested only with snmp v3 (no reason to use snmp v1/2c) but it should work with same syntax from snmpwalk.
It is in fact just passing most of parameters "as is" to snmpwalk. I recommend to include some timeout and retry value like below. Adjust based on you need, check syntax from snmpwalk and use "" to define as a single string snmp argument.
Check if number of APs listed in critical is < than current on wlan controller, if not check if number of APs listed in warning .
Run as follow :
/usr/local/nagios/libexec/check_snmp_wlc_ap -H -c -w --snmp "-v 3 -a hash -A pass -l authPriv -u mysnmpuser -x cypher -X pass -r 5 -t 30"
Reviews
(0)
Add a Review
Page Sections
Project Stats
Rating
0 (0)
Favorites
0
Views
5,778