Cisco

Check Cisco Stack status

Description:

Check the state of the redundant stack ring, switches in the stack ring and stackport status via SNMP.

Current Version

0.2

Last Release Date

2017-06-10

Compatible With

  • Nagios 1.x
  • Nagios 2.x
  • Nagios 3.x
  • Nagios 4.x
  • Nagios XI

License

GPL


Nagios CSP

Meet The New Nagios Core Services Platform

Built on over 25 years of monitoring experience, the Nagios Core Services Platform provides insightful monitoring dashboards, time-saving monitoring wizards, and unmatched ease of use. Use it for free indefinitely.

Monitoring Made Magically Better

  • Nagios Core on Overdrive
  • Powerful Monitoring Dashboards
  • Time-Saving Configuration Wizards
  • Open Source Powered Monitoring On Steroids
  • And So Much More!
Project Files
Project Notes
Example outputs: ./check_snmp_cisco_stack.pl -H 192.168.1.1 -C public Ring Redundant: yes, Switch States: sw1(sn:AAAABBBCCCC)=ready, sw2(sn:EEEFFFGGGG)=ready, Port States: up(4),down(0),forcedDown(0) : OK
Reviews (1) Add a Review
Wokring properly for Cisco 9300 & 9500 Switches
by nishith, November 30, 2022
Tested on Cisco 9300 & 9500 Switches.

My Command Output is as stated below.
===========================
/usr/local/nagios/libexec/check_snmp_cisco_stack.pl -H 192.168.1.11 -C nnv007 -2
Ring Redundant: yes, Switch States: sw2(sn:FOCXXX)=ready, sw1(sn:FCWXXX)=ready, Port States: up(4),down(0),forcedDown(0) : OK
===========================
192.168.1.11: Switch IP Address.
nnv007: SNMP Community Name.
-2: SNMP Version 2
===========================
Helpful? Yes  No 
Add a Review

You must be logged in to submit a review.

Thank you for your review!

Your review has been submitted and is pending approval.

Recommend

To:


From:


Thank you for your recommendation!

Your recommendation has been sent.

Project Stats
Rating
5 (2)
Favorites
0
Views
9,064