Cisco

Check Cisco OSPF Interface

Write a Review

Description:

Check OSPF Interface status and re-calculation.

Current Version

0.1

Last Release Date

2015-07-16

Compatible With

  • Nagios 1.x
  • Nagios 2.x
  • Nagios 3.x
  • Nagios 4.x
  • Nagios XI
  • Nagios Fusion
  • Nagios Reactor
  • Nagios Network Analyzer
  • Nagios Log Server

Owner

Michiel Timmers

License

GPL

Copy Page Link Recommend Contact Owner Login to Add to Favorites Login to Claim
Nagios CSP

Meet The New Nagios Core Services Platform

Built on over 25 years of monitoring experience, the Nagios Core Services Platform provides insightful monitoring dashboards, time-saving monitoring wizards, and unmatched ease of use. Use it for free indefinitely.

Download Now

Monitoring Made Magically Better

  • Nagios Core on Overdrive
  • Powerful Monitoring Dashboards
  • Time-Saving Configuration Wizards
  • Open Source Powered Monitoring On Steroids
  • And So Much More!
Project Files
FileDescription
check_snmp_cisco_ospf-interface.pl

Version 0.1 - July 16 2015

Project Notes
Checks the OSPF Interface status and number of re-calculations using SNMP. Will report warning if there is a change in re-calculation in last 24 hours. ./check_snmp_cisco_ospf-interface.pl -H 192.168.1.1 -C public Interface Status: 172.20.10.10 = enabled, pointToPoint, active, 172.30.10.10 = enabled, otherDesignatedRouter, active, Re-calculations in last 24 hours: 172.20.10.10 = 0, 172.30.10.10 = 0,: OK
Reviews (1) Add a Review
beware Cisco IOS newer than 12.2
by ikx1000@gmail.com, November 30, 2020
Very limited functionality with modern IOS-es, and typical MPLS VPNs. It is a IOS limitation, not the plugin itself. The only chance is to configure ospf traps on the router and trap handling, passive service on Nagios. IOS config:
snmp-server host ....
snmp-server enable traps ospf

"Cisco IOS Release 12.0(26)S, 12.2(25)S, 12.2(27)SBC, 12.2(31)SB2 and later
releases, the OSPF MIB and CISCO OSPF MIB will be supported only for the first OSPF process [....] SNMP traps will be generated for OSPF events that are related to any of the OSPF processes.
There is no workaround for this situation."

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_ospf/configuration/15-sy/iro-15-sy-book/iro-mib-1850.pdf
Helpful?    
Report
Add a Review

You must be logged in to submit a review.

Thank you for your review!

Your review has been submitted and is pending approval.

Recommend

To:


From:


Thank you for your recommendation!

Your recommendation has been sent.

Page Sections
Project Overview Project Files Project Notes Reviews
Project Stats
Rating
3 (1)
Favorites
0
Views
6,524