Hardware

Please, issue a 'perldoc check_ilom.pl' for more information. Sorry for the lack of updates to this plugin. SUN continually decides to completely overhual the SNMP…

check_brocade -z host -t (maxtemp) -r (minrpm) Only tested with a Connectrix DS-16B3.

Check Traffic Usage of an Interface on a Cisco Device This is a bit tricky, because cisco's snmp counter are independent from the cli output.…

The main design goal of this plugin is to monitor one network device with one plugin. It is optimized for speed and allows to monitor…

Notes Although some of the checks in this plugin are also in the "check_snmp_env" (version 1.3) from Patrick Proy I strongly suggest using this version…

This Script is capable to check MPLS Routers for their correct Ip's (Active / Passive) by querying them with SNMP and to compare this result…

This perl script checks via SNMP the status of a Cisco Catalyst 3750,3650,3850 stack. It needs the Net::SNMP module available from CPAN. **NOTE 1:** The…

INSTALLATION Copy this Perl script in your nagios/libexec directory, for example /usr/local/nagios/libexec/. Usage :check_redund_switch --switchA or A -> name/ip --switchB or B -> name/ip --warn…

It is tested OK on SS4400 and the SS49XX series. unfortunately it failes on the 4500 series... :-( It gives the states from all FANs,…

This script checks the hardware status van DELL powerconnect switches. It is tested on a PC3524 and the PC6248. I have tested it for groundwork…

This script monitors the Modules on both Cisco Catalyst 6500 and Catalyst 4500 switches.