Hardware

This is a script to check RAM, CPU, Active Recipients, Work Queue, Mail Rate, Status, Oldest Message and AsyncOS Release on Cisco Ironport Email Security…

Command Line Examples: check_dell_ups.pl -H 192.168.5.1 -C public -T serial_number check_dell_ups.pl -H 192.168.5.1 -C public -T battery_remaining -U m -w 15 -c 8 check_dell_ups.pl -H…

This plugin checks all volumes active on recent ARECA raid cards under Linux/Unix. The plugin makes use of the cli32/cli64 utility supplied by ARECA to…

I already test it with cisco 2960 and cisco 3650G. If get any erro, pls give feedback and I will fix it. Ty all cya.

This plugin is the original named check_quotaNetApp.pl (from Martin Knechtel ([email protected])). Unfortunatly it exists on NagiosExchange but the file is empty. So I retrieve it…

This plugin will pull any published statistics from a Cisco IronPort Email Security Appliance, using the SNMPv2 interface. You can optionally use SNMPv3 and specify…

Plugin allows you checking the operational status of power supplies, fans, voltage and temperature levels managing these values: · Normal: The component or checked value…

As discussed here: http://blog.shadowgears.com/2010/07/nagios-ipmi-monitoring.html This is a python based Nagios IPMI monitoring tool. It isn't specific to any hardware and is based off the sensor…

This script will enumerate via SNMP the currently active VPN's. It will then test against the specified VPN name to see if the VPN is…