Watchguard Network

Usage: check_wg_network.sh [options] # -h | --host: ip of device. # -w | --warning: optional. Number of connections warning. # -c | --critical: optional. Number of connections critical. # -iw | --iwarning: optional. % of usage of interface warning. # -ic | --icritical: optional. % of usage of interface critical. # -v | --version: snmp version. Default 2. Depends on version you must specify: ##### 2: -s | --string: snmp community string. Default public. ##### 3: -u | --user: user. -p | --pass: password. # -i | --interfaces: list of interfaces to monitor. Default all (autodetects interfaces). Ex: "eth0 eth1 eth2 eth3" # -t | --time: polling time in seconds. Default 10. # -d | --dspeed: default speed of interfaces in case that snmp returns 0. Default 1000000000. Example: check_wg_network.sh -h 192.168.2.100 -c 800000 -w 900000 -v 2 -s publicwg -i "eth0 eth1 vlan1" Example: check_wg_network.sh -h 192.168.2.100 -c 800000 -w 900000 -v 3 -u read -p 1234567789 -t 15 Example of output with performance data after | ./check_wg_network.sh -h 192.168.2.100 -s publicsnmp -w 30000 -c 40000 -iw 80 -ic 90 -i "eth3 vlan1" Ok. Number of connections: 1360. eth3=IN:5.926Mb/s OUT:3.586Mb/s. vlan1=IN:0.185Mb/s OUT:3.029Mb/s | conn=1360;30000;40000;; eth3_in=5.926Mb;800;900;0;1000 eth3_in%=0.59%;80;90;0;100 eth3_out=3.586Mb;800;900;0;1000 eth3_out%=0.35%;80;90;0;100 vlan1_in=0.185Mb;800;900;0;1000 vlan1_in%=0.01%;80;90;0;100 vlan1_out=3.029Mb;800;900;0;1000 vlan1_out%=0.30%;80;90;0;100

You must be logged in to submit a review.

Your review has been submitted and is pending approval.

Your recommendation has been sent.

Project Overview Project Photos Project Notes Reviews