NagiosPlugin-HPSmartArrayController

NagiosPlugin-HPSmartArrayController A small Ruby plugin for Nagios for Smart Array controllers (all models supported by hpacucli) USAGE show help [root@myserver plugins]# ./check_smart_array -h Usage: check_smart_array --slot SLOT_NUMBER status OK [root@myserver plugins]# ./check_smart_array --slot 4 Smart Array OK Check of array status Simple check inside this output: root@myserver plugins]# hpacucli ctrl slot=4 show config | head Smart Array P812 in Slot 4 (sn: xxxxxxxxxxxxxxx) array A (SAS, Unused Space: 0 MB) logicaldrive 1 (136.7 GB, RAID 1, OK) physicaldrive 6I:1:1 (port 6I:box 1:bay 1, SAS, 146 GB, OK) physicaldrive 6I:1:2 (port 6I:box 1:bay 2, SAS, 146 GB, OK) logicaldrive,physicaldrive should be OK for an exit status OK Check of controller status [root@myserver plugins]# hpacucli ctrl slot=4 show status Smart Array P812 in Slot 4 Controller Status: OK Cache Status: OK Battery/Capacitor Status: OK for exit status OK all should be OK check configuration Check command* Command view => check_nrpe $ARG1$ check_smart_array $ARG2$ -a '-s 4' nrpe.cfg ### Check clustat for HP Smart Array Controller ### command[check_smart_array]=sudo /usr/local/nagios/plugins/check_smart_array.rb $ARG1$ $ARG2$ SUDO nagios ALL=NOPASSWD:/usr/local/nagios/plugins/check_smart_array.rb

You must be logged in to submit a review.

Your review has been submitted and is pending approval.

Your recommendation has been sent.

Project Overview Project Files Project Notes Reviews