Build precise queries to find exactly what you need
Press ESC to close
Join our next live webinar: “Advanced Nagios Monitoring Techniques” – Register Now
Your review has been submitted and is pending approval.
Excellent plugin developed by OP5. Work with ESX4, vSephere. Entire DC can be monitored by quering through vCenter…
sage: esx_cpu.pl -D | -H [ -N ] -u -p | -f -l [ -s ] [ -x ] [ -t ] [ -w ] [ -c ] [ -V ] [ -h ]
-?, –usage Print usage information -h, –help Print detailed help screen -V, –version Print version information –extra-opts=[
-H, –host= ESX or ESXi hostname.
-D, –datacenter= Datacenter hostname.
-N, –name= Virtual machine name.
-u, –username= Username to connect with.
-p, –password= Password to use with the username.
-f, –authfile= Authentication file with login and password. File syntax : username= password= -w, –warning=THRESHOLD Warning threshold. See http://nagiosplug.sourceforge.net/developer-guidelines.html#THRESHOLDFORMAT for the threshold format. -c, –critical=THRESHOLD Critical threshold. See http://nagiosplug.sourceforge.net/developer-guidelines.html#THRESHOLDFORMAT for the threshold format. -l, –command=COMMAND Specify command type (CPU, MEM, NET, IO, VMFS, RUNTIME, …) -s, –subcommand=SUBCOMMAND Specify subcommand -S, –sessionfile=SESSIONFILE Specify a filename to store sessions for faster authentication -x, –exclude= Specify black list -t, –timeout=INTEGER Seconds before plugin times out (default: 30) -v, –verbose Show details for command-line debugging (can repeat up to 3 times)
Supported commands(^ means blank or not specified parameter) : Common options for VM, Host and DC :
* cpu – shows cpu info + usage – CPU usage in percentage + usagemhz – CPU usage in MHz ^ all cpu info
* mem – shows mem info + usage – mem usage in percentage + usagemb – mem usage in MB + swap – swap mem usage in MB + overhead – additional mem used by VM Server in MB + overall – overall mem used by VM Server in MB ^ all mem info
* net – shows net info + usage – overall network usage in KBps(Kilobytes per Second) + receive – receive in KBps(Kilobytes per Second) + send – send in KBps(Kilobytes per Second) ^ all net info
* io – shows disk io info + read – read latency in ms + write – write latency in ms ^ all disk io info
* runtime – shows runtime info + status – overall host status (gray/green/red/yellow) + issues – all issues for the host ^ all runtime info
VM specific : * cpu – shows cpu info + wait – CPU wait in ms * mem – shows mem info + swapin – swapin mem usage in MB + swapout – swapout mem usage in MB + active – active mem usage in MB * io – shows disk I/O info + usage – overall disk usage in MB/s * runtime – shows runtime info + con – connection state + cpu – allocated CPU in MHz + mem – allocated mem in MB + state – virtual machine state (UP, DOWN, SUSPENDED) + consoleconnections – console connections to VM + guest – guest OS status, needs VMware Tools + tools – VMWare Tools status Host specific : * net – shows net info + nic – makes sure all active NICs are plugged in * io – shows disk io info + aborted – aborted commands count + resets – bus resets count + kernel – kernel latency in ms + device – device latency in ms + queue – queue latency in ms * vmfs – shows Datastore info + (name) – info for datastore with name (name) ^ all datastore info * runtime – shows runtime info + con – connection state + health – checks cpu/storage/memory/sensor status + maintenance – shows whether host is in maintenance mode + list(vm) – list of VMWare machines and their statuses * service – shows Host service info + (names) – check the state of one or several services specified by (names), syntax for (names):,,…, ^ show all services DC specific : * io – shows disk io info + aborted – aborted commands count + resets – bus resets count + kernel – kernel latency in ms + device – device latency in ms + queue – queue latency in ms * vmfs – shows Datastore info + (name) – info for datastore with name (name) ^ all datastore info * runtime – shows runtime info + list(vm) – list of VMWare machines and their statuses + listhost – list of VMWare esx host servers and their statuses * recommendations – shows recommendations for cluster + (name) – recommendations for cluster with name (name) ^ all clusters recommendations
CHEC_ESX Version – 0.5 : ————————
Posted new Version 0.5.
Current Version
Last Release Date
August 5, 2010
Owner
tyousuf
License
GPL
Compatible With
check_esx_v.0.2.0
check_esx_v.0.5.0
Examples..... ESX Base OS : ---------------- check_esx -H 10.8.3.115 -u xxx -p xxx -l cpu CHECK_ESX OK - cpu usage=1169.82 MHz (4.99%) | cpu_usagemhz=1169.82Mhz;; cpu_usage=4.99%;; #check_esx -H 10.8.3.115 -u xxx -p xxx -l cpu -s usage -w 80 -c 90 -t 60 CHECK_ESX OK - cpu usage=3.56 % | cpu_usage=3.56%;80;90 #check_esx -H 10.8.3.115 -u xxx -p xxx -l vmfs CHECK_ESX OK - storages : Storage1=2287.00 MB (3.36%), Storage3=35440.00 MB (3.72%), Storage2=40352.00 MB (14.49%) | Storage1=2287.00MB;; Storage3=35440.00MB;; Storage2=40352.00MB;; #check_esx -H 10.8.3.115 -u xxx -p xxx -l net CHECK_ESX OK - net receive=4.40 KBps, send=0.30 KBps, all 1 NICs are connected | net_receive=4.40KBps;; net_send=0.30KBps;; OK_NICs=1;; Bad_NICs=0;; #check_esx -H 10.8.3.115 -u xxx -p xxx -l io CHECK_ESX OK - io commands aborted=0, io bus resets=0, io read latency=0 ms, write latency=0 ms, kernel latency=0 ms, device latency=0 ms, queue latency=0 ms | io_aborted=0;; io_busresets=0;; io_read=0ms;; io_write=0ms;; io_kernel=0ms;; io_device=0ms;; io_queue=0ms;; #check_esx -H 10.8.3.115 -u xxx -p xxx -l runtime CHECK_ESX OK - 3/4 VMs up, overall status=green, connection state=connected, maintenance=no, All 175 health checks are Green, no config issues | vmcount=3units;; #check_esx -H 10.8.3.115 -u xxx -p xxx -l service CHECK_ESX OK - services : ntpd (down), sshd (up), vmware-vpxa (up), vmware-webAccess (up) VM checks from Base OS: ------------------------------ #check_esx -H 10.8.3.115 -N cs1 -u xxx -p xxx -l cpu CHECK_ESX OK - "cs1" cpu usage=467.13 MHz(3.99%) wait=19626.20 ms | cpu_usagemhz=467.13Mhz;; cpu_usage=3.99%;; cpu_wait=19626.20ms;; CHEC_ESX Version - 0.5 : ------------------------ Along with other improvement, It has new features like: Cluster monitoring. Storage (SAN - Luns/Paths/adapters etc). Vmware Tools I like the extra feature where you can call native nagios options via vcenter or esx.... --extra-opts=[section][@file] Read options from an ini file. See http://nagiosplugins.org/extra-opts for usage
Great plugin but in 6.7 the hardware sensor status is not working
Hello, After we upgrade our ESX, script stop monitoring hardware sensor status. it shows problem: Cannot report on the current health state of the element Can somebody help me how can i resolve issue. This script is very good, but without solving my issue i cant use it.
Hi, a have a problem with this plugins: ./check_esx3-0.5.pl Bareword "OK" not allowed while "strict subs" in use at ./check_esx3-0.5.pl line 630. Bareword "UNKNOWN" not allowed while "strict subs" in use at ./check_esx3-0.5.pl line 98. Bareword "CRITICAL" not allowed while "strict subs" in use at ./check_esx3-0.5.pl line 327. Bareword "CRITICAL" not allowed while "strict subs" in use at ./check_esx3-0.5.pl line 380. Bareword "CRITICAL" not allowed while "strict subs" in use at ./check_esx3-0.5.pl line 433. Bareword "CRITICAL" not allowed while "strict subs" in use at ./check_esx3-0.5.pl line 475. Bareword "CRITICAL" not allowed while "strict subs" in use at ./check_esx3-0.5.pl line 503. Bareword "CRITICAL" not allowed while "strict subs" in use at ./check_esx3-0.5.pl line 541. Bareword "CRITICAL" not allowed while "strict subs" in use at ./check_esx3-0.5.pl line 555. Execution of ./check_esx3-0.5.pl aborted due to compilation errors. Do you have a solutions ?
Hi , This scripts works very perfectly in my environment. but we need to use the key instead of username and password. Will that be possible to use the key authentication to the esx servers instead of username and password. If possible just suggest me where the changes has to be done. Will try that too. Hoping the reply for this. Thanks in advance.
Hi, The check return a Critical (it seems by default) when CPU usage is 80 -c 90 It is possible to cancel this critical? Thanks in advance.
I am setting this up with the 6.0 SDK, which has extra security measures re: certificates I can run the Datacentre checks fine and the Guest checks fine but get a login error on the host checks- I've logged into the vSphere client fine using the same username and password and I am able to browse the settings of the host with no issues I have tried running the esxcli directly but it is getting the same error- I've tried using the 'thumbnail' but once again the same login issue.... Any ideas?
After install of all needed plugins and packages I'm able to run script: ./check_esx3-0.5.pl Usage: check_esx3-0.5.pl -D | -H [ -N ] -u -p | -f -l [ -s ] [ -x ] [ -o ] [ -t ] [ -w ] [ -c ] [ -V ] [ -h ] Missing argument: command So I assume there is nothing to add from perl/plugins/toolikts etc... However I had a problem since after runing a command to check something like: ./check_esx3-0.5.pl -H IP.of.single.esx -u user -p password -l cpu I see in Events on GUI that user was logged, but script running for 10 minutes without any output. What need to be checked?
All my cheks are ok but each of them generates an identification and disconnection on vSphere . How to get around that?
Hello I tried to use this script on a debian 8 but I have the problem that - if I call this check on a shell as root I will get an answer - if I call this check on a shell as user nagios I will get an answer BUT!! If the nagios-server will call this check I get the answer that I should install the perl-sdk?? Do you have any hints for me? regards Viktor
@leejm_ca Why would i want to compile all those things when it should work without, can give me some pointers on how to change the script to make use of whats already available?
Works great! Thank you very much!
I really appreciate author's great contribution. Prior to make this fabulous plugin working on my CentOS 5.9 (32 bit), I need to do the following: #yum install -y openssl-devel Install the Perl module #perl -MCPAN -e shell cpan> install Nagios::Plugin cpan> exit If cpanminus is installed previously, we can install in such way: #cpanm Nagios::Plugin Install "VMware Infrastructure (VI) Perl Toolkit" (VMware-VIPerl-1.6.0-104313.i386.tar.gz OR VMware-VIPerl-1.6.0-104313.x86_64.tar.gz) When done, this plugin works perfectly.
I added $ENV{PERL_LWP_SSL_VERIFY_HOSTNAME} = 0; to make it run. But now I always get this output ./check_esx3-0.5.pl -H 192.168.77.70 -u user -p mypassword -l cpu ******************************************************************* Using the default of SSL_verify_mode of SSL_VERIFY_NONE for client is deprecated! Please set SSL_verify_mode to SSL_VERIFY_PEER together with SSL_ca_file|SSL_ca_path for verification. If you really don't want to verify the certificate and keep the connection open to Man-In-The-Middle attacks please set SSL_verify_mode explicitly to SSL_VERIFY_NONE in your application. ******************************************************************* at /usr/lib64/perl5/vendor_perl/5.12.4/LWP/Protocol/http.pm line 31 ******************************************************************* Using the default of SSL_verify_mode of SSL_VERIFY_NONE for client is deprecated! Please set SSL_verify_mode to SSL_VERIFY_PEER together with SSL_ca_file|SSL_ca_path for verification. If you really don't want to verify the certificate and keep the connection open to Man-In-The-Middle attacks please set SSL_verify_mode explicitly to SSL_VERIFY_NONE in your application. ******************************************************************* at /usr/lib64/perl5/vendor_perl/5.12.4/LWP/Protocol/http.pm line 31 ******************************************************************* Using the default of SSL_verify_mode of SSL_VERIFY_NONE for client is deprecated! Please set SSL_verify_mode to SSL_VERIFY_PEER together with SSL_ca_file|SSL_ca_path for verification. If you really don't want to verify the certificate and keep the connection open to Man-In-The-Middle attacks please set SSL_verify_mode explicitly to SSL_VERIFY_NONE in your application. ******************************************************************* at /usr/lib64/perl5/vendor_perl/5.12.4/LWP/Protocol/http.pm line 31 CHECK_ESX3-0.5.PL OK - cpu usage=8070.00 MHz (23.69%) | cpu_usagemhz=8070.00Mhz;; cpu_usage=23.69%;; Would be perfect if this would be fixed
Script was fairly easy to setup; hardest part was getting the VMWare SDK/API for Perl to install properly. Question: Is there a way to change the script such that the output to Nagios doesn't include the name of the script (in all caps) directly before the returned status? All of my check results look like: CHECK_ESX.PL OK - ... I'd like to not have the check_esx.pl bit first. Note, this is the name of the script on my system as I renamed from what it's downloaded as for my ease of use
first in perl as other mentioned install Nagios::Plugin then install Crypt::SSLeay install Compress::Zlib install Class::MethodMaker if you get the error "Permission to perform this operation was denied." the set Permissions on ESX (i) check. The created user must be in the group users and be placed under Permissions to Read Only. if you get : SSL_verify_mode of SSL_VERIFY_NONE for client is depreciated! then #perl -MCPAN -e shell #install GAAS/libwww-perl-5.837.tar.gz #install GAAS/Net-HTTP-6.03.tar.gz information got from the forum : http://communities.vmware.com/message/2202177
xxx@myhost:/usr/local/nagios/libexec$ ./check_esx3-0.5.pl -H hostadress -u user -p password -l cpu Undefined subroutine &Util::disconnect called at ./check_esx3-0.5.pl line 555.
Hi, i'm using this cool plugin since 2 weeks, it was not super easy to set up, but now that it is working, it's awesome ! I've just got one request. Is it possible to change de output in order to remove the "CHECK_ESX.PL" part in front of each output ? CHECK_ESX.PL OK : ...... Thanks! Ivan
Does anyone face this problem ? CPAN not able to install following Perl modules on the system. These must be installed manually for use by vSphere CLI: UUID 0.03 or newer XML::LibXML::Common 0.13 or newer XML::LibXML 1.63 or newer I ran the check_esx3.pl , on my nagios server and it says installer has successfully installed both vSphere CLI and SDK for perl... enjoy, the vmware team. Did a bit of scrolling up and saw Esx3 UNKNOWN - Missing perl module VMWare::VIRuntime. Download and install Perl TOolkit available at ..vmware/download..
If you have the ability to use yum, you can use the following command to install all the perl necessities. yum install perl-Nagios*
1. Works fine with MB Size root@lankini:/usr/local/nagios/libexec# ./check_esx -H 172.16.16.51 -f authfile -l vmfs -s datastore1 -o used -w 67703 CHECK_ESX OK - Storages : 'datastore1'(used)=67703 MB (61.79%) | datastore1=67703MB;67703; 3. not fine with % style root@lankini:/usr/local/nagios/libexec# ./check_esx -H 172.16.16.51 -f authfile -l vmfs -s datastore1 -o used -w 90 CHECK_ESX WARNING - Storages : 'datastore1'(used)=67703 MB (61.79%) | datastore1=67703MB;90; 4. root@lankini:/usr/local/nagios/libexec# ./check_esx -H 172.16.16.51 -f authfile -l vmfs -s datastore1 -o used CHECK_ESX OK - Storages : 'datastore1'(used)=67703 MB (61.79%) | datastore1=67703MB;; PerfData structure Info :: http://nagiosplug.sourceforge.net/developer-guidelines.html#THRESHOLDFORMAT As per my understanding, 'label'=value[UOM];[warn];[crit];[min];[max] [ UOM is Unit of Measure ] 1.min and max are not required if UOM=% Here the script is using MBYTES If the Script Can update the [min] and [max] fileds in the perf data output. Then We can use -w 90 ( % here) direclty to check on % basis Else We have to use like -w 67703 ( -w MBSize ). Giving size in MB for a number of DISK across different VM's is complex. If it is % basis then it is straight forward. Please help in modifying the script to update [MIN][MAX] with min and max values in MB. Here is the Example of C: Drive Space Check, This works perfectly. 1. root@lankini:/usr/local/nagios/libexec# ./check_nt -H 172.16.32.38 -v USEDDISKSPACE -p 12489 -s nagios124 -l c -w 80 c: - total: 15.00 Gb - used: 13.83 Gb (92%) - free 1.16 Gb (8%) | 'c: Used Space'=13.83Gb;12.00;0.00;0.00;15.00 2. root@lankini:/usr/local/nagios/libexec# ./check_nt -H 172.16.32.38 -v USEDDISKSPACE -p 12489 -s nagios124 -l c -c 90 c: - total: 15.00 Gb - used: 13.83 Gb (92%) - free 1.16 Gb (8%) | 'c: Used Space'=13.83Gb;0.00;13.50;0.00;15.00 'LABEL'=UOM;Warning;Critical;mininum;maximum
I can set up all the tests I need for my vCenter server, physical hosts and VM's. Awesome job. Once I got the VMWare Perl SDK installed and configured with all the necessary Perl modules (which the VMWare installer installed automatically), I was able to successfully run the script, but this is the error I got when trying some scripts against my hosts: CHECK_ESX3.PL CRITICAL - Server version unavailable at 'https://... This was due to the nature of the ESXi SSL certificate. I disabled SSL by adding the following near the top of my check_esx3.pl script, around line 32 or so: $ENV{PERL_LWP_SSL_VERIFY_HOSTNAME} = 0; Now it works great!!!
Hi, I wanted to monitor the VM Esxi server, let me know what agents needs to be configured in ESX. Please revert for any clarification. Regards, Raj.
In addition to the dependencies listed by leejm_ca (THANKS!) I also had to install Module::Implementation.
Thanks to leejm_ca above. I finally got this working on centos 6.2 64bit, nagios 3.2.3. Perl is picky. Took me several hours, several. By the way this is running against a vSphere 5 infrastructure. Thanks
Mark, you're missing a few perl modules. On Ubuntu apt-get install libxml-perl libclass-methodmaker-perl libnet-ssleay-perl libcrypt-ssleay-perl
Very nice plugin. I'll echo what the others said on making sure you get the prereq's installed, but after that's done it works perfectly and reports on a lot of parameters for both VMs and DCs. The one nit I have is with setting warn and crit thresholds. Seems it works for some parameters like memory, but setting them to alarm for high datastore utilization doesn't seem to work.
Had this plugin quickly running, after installing VMware perl module's as stated in the help tekst. I needed a good plugin to monitor VMFS usage. default this plugin shows your free space, but that's not what i wanted. use the -o used option to show your used space, as below: check_esx3.pl -D $HOSTADDRESS$ -f ~/vm-vsphere -l vmfs -s SAN_SCSI_1 -w 450000 -c 475000 -o used This is not well documented, but very usefull!
Initial set-up was no problem - just followed the instructions at the top of the check. Having problems with getting it to work with anything other than the root account on our ESXi 4.1 hosts. Works fine at datacenter level but on the individual host no matter what we do we get "Error: Permission to perform this operation was denied." Any help appreciated.
Hi, After installing the good perl module and vi toolkit, I could get it to work. But the session file store doesn't seem to work, for me : libexec/check_esx.pl -H ESXi -u 'login' -p 'pass' -l cpu -S test.session2 CHECK_ESX.PL OK - cpu usage=210.82 MHz (1.41%) | cpu_usagemhz=210.82Mhz;; cpu_usage=1.41%;; libexec/check_esx.pl -H ESXi -u 'login' -p 'pass' -l cpu -S test.session2 CHECK_ESX.PL CRITICAL - Undefined subroutine &URI::_generic::port called at /usr/share/perl/5.10/VMware/VILib.pm line 236 Content of session file is like this : cat test.session #LWP-Cookies-1.0 Set-Cookie3: vmware_soap_session=""some hash letters and numbers""; path="/"; domain=ESXi.local; path_spec; discard; version=0 Any idea ? Thanks
Its a very cool plugin - but i keep getting som SSL info every time i run the file: ./check_esx.pl -v -H 100.100.100.100 -N xWeb -u xxx -p xxx -l mem -s usage -w 80 -c 90 -t 60 SSL_connect:before/connect initialization SSL_connect:SSLv2/v3 write client hello A SSL_connect:SSLv3 read server hello A SSL_connect:SSLv3 read server certificate A SSL_connect:SSLv3 read server certificate request A SSL_connect:SSLv3 read server done A SSL_connect:SSLv3 write client certificate A SSL_connect:SSLv3 write client key exchange A SSL_connect:SSLv3 write change cipher spec A SSL_connect:SSLv3 write finished A SSL_connect:SSLv3 flush data SSL_connect:SSLv3 read finished A SSL_connect:before/connect initialization SSL_connect:SSLv2/v3 write client hello A SSL_connect:SSLv3 read server hello A SSL_connect:SSLv3 read server certificate A SSL_connect:SSLv3 read server certificate request A SSL_connect:SSLv3 read server done A SSL_connect:SSLv3 write client certificate A SSL_connect:SSLv3 write client key exchange A SSL_connect:SSLv3 write change cipher spec A SSL_connect:SSLv3 write finished A SSL_connect:SSLv3 flush data SSL_connect:SSLv3 read finished A SSL_connect:before/connect initialization SSL_connect:SSLv2/v3 write client hello A SSL_connect:SSLv3 read server hello A SSL_connect:SSLv3 read server certificate A SSL_connect:SSLv3 read server certificate request A SSL_connect:SSLv3 read server done A SSL_connect:SSLv3 write client certificate A SSL_connect:SSLv3 write client key exchange A SSL_connect:SSLv3 write change cipher spec A SSL_connect:SSLv3 write finished A SSL_connect:SSLv3 flush data SSL_connect:SSLv3 read finished A CHECK_ESX.PL OK - "xWeb" mem usage=22.99 % | mem_usage=22.99%;80;90 can this SSL info be disabled somehow?
Very nice, thank you! It was indeed necessary to follow leejm_ca's notes. I have it working in Opsview on a Ubuntu-server now monitoring four ESXi hosts running vSphere 4.1
Prerequisites: I ran into a lot of issues trying to get this plugin to work on my Nagios RedHat 4_Update6 host. Such as…. I received errors when using an old version of CPAN to download, build and install Perl modules required by the check_esx3.pl plugin. To resolve this I upgraded Nagios server to Redhat 5_Update 6 and also received a few awesome suggestions from the Nagiosplug-help communities. Using the advice I was given I then took the following steps: - Downloaded check_esx3.pl from Nagios Plugin Exchange - As per check_esx.txt, I downloaded and installed “VMware-vSphere-Perl-SDK-4.1.0-254719.i386.tar.gz “ - I then ran the ./check_esx3.pl script and received the error: Can't locate Nagios/Plugin.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) at ./check_esx3.pl line 31. BEGIN failed--compilation aborted at ./check_esx3.pl line 31. - Using CPAN I installed the requested module: #perl -MCPAN -e 'install Nagios::Plugin' -Tried ./check_esx3.pl and received error: Can't locate Params/Validate.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) at /usr/lib/perl5/site_perl/5.8.8/Nagios/Plugin/Functions.pm line 11. BEGIN failed--compilation aborted at /usr/lib/perl5/site_perl/5.8.8/Nagios/Plugin/Functions.pm line 11. Compilation failed in require at /usr/lib/perl5/site_perl/5.8.8/Nagios/Plugin.pm line 4. BEGIN failed--compilation aborted at /usr/lib/perl5/site_perl/5.8.8/Nagios/Plugin.pm line 4. Compilation failed in require at ./check_esx3.pl line 31. BEGIN failed--compilation aborted at ./check_esx3.pl line 31. - Using CPAN I installed the requested module: # perl -MCPAN -e 'install Params::Validate' -Ran ./check_esx3.pl and received error: Can't locate Math/Calc/Units.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) at /usr/lib/perl5/site_perl/5.8.8/Nagios/Plugin/Functions.pm line 12. BEGIN failed--compilation aborted at /usr/lib/perl5/site_perl/5.8.8/Nagios/Plugin/Functions.pm line 12. Compilation failed in require at /usr/lib/perl5/site_perl/5.8.8/Nagios/Plugin.pm line 4. BEGIN failed--compilation aborted at /usr/lib/perl5/site_perl/5.8.8/Nagios/Plugin.pm line 4. Compilation failed in require at ./check_esx3.pl line 31. BEGIN failed--compilation aborted at ./check_esx3.pl line 31. - Using CPAN I installed the requested module: # perl -MCPAN -e 'install Math::Calc::Units' - Ran ./check_esx3.pl and received error: Base class package "Class::Accessor::Fast" is empty. (Perhaps you need to 'use' the module which defines that package first.) at /usr/lib/perl5/site_perl/5.8.8/Nagios/Plugin.pm line 11 BEGIN failed--compilation aborted at /usr/lib/perl5/site_perl/5.8.8/Nagios/Plugin.pm line 11. Compilation failed in require at ./check_esx3.pl line 31. BEGIN failed--compilation aborted at ./check_esx3.pl line 31. - Using CPAN I installed the requested module: perl -MCPAN -e 'install Class::Accessor::Fast' - Ran ./check_esx3.pl and received error: Base class package "Config::Tiny" is empty. (Perhaps you need to 'use' the module which defines that package first.)at /usr/lib/perl5/site_perl/5.8.8/Nagios/Plugin/Config.pm line 6 BEGIN failed--compilation aborted at /usr/lib/perl5/site_perl/5.8.8/Nagios/Plugin/Config.pm line 6. Compilation failed in require at /usr/lib/perl5/site_perl/5.8.8/Nagios/Plugin/Getopt.pm line 16. BEGIN failed--compilation aborted at /usr/lib/perl5/site_perl/5.8.8/Nagios/Plugin/Getopt.pm line 16. Compilation failed in require at /usr/lib/perl5/site_perl/5.8.8/Nagios/Plugin.pm line 64. - Using CPAN I installed the requested module: perl -MCPAN -e 'install Config::Tiny' - Now able to run ./check_esx3.pl Usage: check_esx3.pl -D | -H [ -N ] -u -p | -f -l [ -s ] [ -x ] [ -t ] [ -w ] [ -c ] [ -V ] [ -h ]
You must be logged in to submit a review.
To:
From: