Build precise queries to find exactly what you need
Press ESC to close
Join our next live webinar: “Advanced Nagios Monitoring Techniques” – Register Now
Your review has been submitted and is pending approval.
Checks if OSPF process is active on at least one interface of a network device using Simple Network Management Protocol (SNMP)
Current Version
Last Release Date
June 23, 2009
Owner
Nagios Exchange
Compatible With
check_ospf source code + binary
To monitor process activity I am using ospfAdminStat OID (1.3.6.1.2.1.14.1.2)
Very limited functionality with modern IOS-es, and typical MPLS VPNs. It is a IOS limitation, not the plugin itself. The only chance is to configure ospf traps on the router and trap handling, passive service on Nagios. IOS config: snmp-server host .... snmp-server enable traps ospf "Cisco IOS Release 12.0(26)S, 12.2(25)S, 12.2(27)SBC, 12.2(31)SB2 and later releases, the OSPF MIB and CISCO OSPF MIB will be supported only for the first OSPF process [....] SNMP traps will be generated for OSPF events that are related to any of the OSPF processes. There is no workaround for this situation." https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_ospf/configuration/15-sy/iro-15-sy-book/iro-mib-1850.pdf
You must be logged in to submit a review.
To:
From: