Liebert Vertiv

Used the https://exchange.nagios.org/directory/Plugins/Hardware/UPS/Liebert/check_ups_alarm/details as a template. Many oid's are identical, but many not... :) ./check_vertiv.pl scriptname [options] -C SNMP Community -H Hostname -P SNMP Port -T SNMP Timeout -w Warning Threshold -c Critical Threshold -X Type of Check (see below) Check Types: batteryStatus Current Status of the Battery [UNKNOWN,NORMAL,LOW,DEPLETED] batteryMinRemaining Estimated minutes of battery life remaining (65535 means we aren't on battery power) batteryChaRemain Shows the current Battery Charge level batterySeconds Number of seconds we've been on battery power (0 means we aren't on battery power) batteryTemperature Current temperature (degrees Farenheit) -k Lower Warning Threshold -r Lower Critical Threshold inputLineBads Counter showing how many times the input has been out of spec outputLoadPercent Percentage of the current load of the Data Center compared to the capacity of the UPS alarmCount Current number of alarms on the UPS Note: The Warning and Critical Thresholds should always be set UNLESS batteryStatus is selected Example: ./check_vertiv.pl -C public -H 193.168.3.30 -X batteryStatus -w 3 -c 4 Working for the Vertiv: batteryStatus Current Status of the Battery [UNKNOWN,NORMAL,LOW,DEPLETED] batteryMinRemaining Estimated minutes of battery life remaining (65535 means we aren't on battery power) batteryChaRemain Shows the current Battery Charge level batterySeconds Number of seconds we've been on battery power (0 means we aren't on battery power) alarmCount Current number of alarms on the UPS outputLoadPercent Percentage of the current load of the Data Center compared to the capacity of the UPS (only for the first phase in this script) untested: inputLineBads Counter showing how many times the input has been out of spec

You must be logged in to submit a review.

Your review has been submitted and is pending approval.

Your recommendation has been sent.

Project Overview Project Files Project Notes Reviews