CyberPower UPS

Perl program for checking the status of a CyberPower UPS. check_cps.pl - v1.0 Nagios script to check status of an CyberPower Systems Uninteruptable Power Supply. Usage: -H Address of hostname of UPS (required) -C SNMP community string (required) -l Command (optional, see command list) -p SNMP port (optional, defaults to port 161) -t Connection timeout (optional, default 10s) -w Warning threshold (optional) -c Critical threshold (optional) -u Script / connection errors will return unknown rather than critical Commands (supplied with -l argument): status Shows output status of UPS (On battery power, bypass, etc) health Shows result of last diagnostic test and date run. Optional warning or critical values for days since last test was run. Will also warn if battery needs replacing. battery Shows current batery replacement status model Shows the model number of the UPS serial Shows the serial number of the UPS transfer Shows the current line transfer status temp Shows the current temp of the UPS in Celcius load[:###] Shows output load in percentage of maximum load. Optional warning or critical values in percentages of total load. If an integer value of the maximum output wattage capacity of the UPS is included after a colon (:), then the output in watts will be included in the result. No command is supplied, the script return OKAY with the UPS model information. Example: check_cps.pl -H ups1.domain.local -C public -l health Not all required options were specified.

You must be logged in to submit a review.

Your review has been submitted and is pending approval.

Your recommendation has been sent.

Project Overview Project Files Project Notes Reviews