Cisco

Check Cisco OSPF Interface

Description:

Check OSPF Interface status and re-calculation.

Current Version

0.1

Last Release Date

2015-07-16

Compatible With

  • Nagios 1.x
  • Nagios 2.x
  • Nagios 3.x
  • Nagios 4.x
  • Nagios XI
  • Nagios Fusion
  • Nagios Reactor
  • Nagios Network Analyzer
  • Nagios Log Server

License

GPL


Project Files
Project Notes
Checks the OSPF Interface status and number of re-calculations using SNMP. Will report warning if there is a change in re-calculation in last 24 hours. ./check_snmp_cisco_ospf-interface.pl -H 192.168.1.1 -C public Interface Status: 172.20.10.10 = enabled, pointToPoint, active, 172.30.10.10 = enabled, otherDesignatedRouter, active, Re-calculations in last 24 hours: 172.20.10.10 = 0, 172.30.10.10 = 0,: OK
Reviews (1) Add a Review
beware Cisco IOS newer than 12.2
by ikx1000@gmail.com, November 30, 2020

Very limited functionality with modern IOS-es, and typical MPLS VPNs. It is a IOS limitation, not the plugin itself. The only chance is to configure ospf traps on the router and trap handling, passive service on Nagios. IOS config: snmp-server host .... snmp-server enable traps ospf "Cisco IOS Release 12.0(26)S, 12.2(25)S, 12.2(27)SBC, 12.2(31)SB2 and later releases, the OSPF MIB and CISCO OSPF MIB will be supported only for the first OSPF process [....] SNMP traps will be generated for OSPF events that are related to any of the OSPF processes. There is no workaround for this situation." https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_ospf/configuration/15-sy/iro-15-sy-book/iro-mib-1850.pdf



Add a Review

You must be logged in to submit a review.

Thank you for your review!

Your review has been submitted and is pending approval.

Recommend

To:


From:


Thank you for your recommendation!

Your recommendation has been sent.

Project Stats
Rating
3 (1)
Favorites
0
Views
6,524