Check MSA 2012i G1

This script completely checks the MSA 2012i G1 through show commands via telnet. No SNMP required. It was made to check MSA 2012i G1, so there is no statistics gathering. Maybe can work on other MSA 2000 or P2000, but was not tested. It takes 4 arguments: username (optional), password (optional), hostname (required) and type of search (required). If no username and password has been given, it will use the default manage user password. With this single script you can make 7 services to check your MSA: - channels: returns to nagios the controller id and port number, current speed of port, ip address and status of port. Returns CRITICAL if not up. - redundancy: returns the operational status of the controllers, if it is redundant and the redundancy mode. Returns CRITICAL if not redundant. - disks: checks if there is an error on some disk. In the case of an error, returns CRITICAL with the values: Disk slot, state, size, owner controller, and the kind of job (if running: scrubbing, expanding, initializing, low-level format, reconstruction or verification). Otherwise, just returns the slot numbers and that they are OK. - enclosure: checks for all enclosure components, in case of an error returns the component name, enclosure number, error data and status. Otherwise just returns OK with chassis number. - frus: checks the status of all field-replaceable units. If everything is ok returns the list of all frus, otherwise returns CRITICAL with fru short name, description, location and state. - sensors: checks the status of all sensors. If all are ok just returns ok, otherwise returns CRITICAL with sensor name, sensor value and sensor status. - vdisks: checks the virtual disks status. If all are online and fault tolerant returns vdisk name, space used, free space, raid type, disk count, number of spares, number of partitions, status and owner controller. Otherwise returns WARNING if the vdisk is online and fault tolerant but with some disk down or if it is online but not fault tolerant or if it is online but with some disk down and not fault tolerant. Returns CRITICAL if the vdisk is offline either because of initialization or because drives are down and data may be lost or the vdisk is in a critical state and has been quarantined because some drives are missing or the vdisk is offline and has been quarantined because some drives are missing. If your nagios throw you an error running the script, try putting the perl path on the command definition to use it instead of the built in perl: define command{ command_name check_msa2012i_g1 command_line /usr/bin/perl $USER1$/check_msa2012i_g1 -h $HOSTADDRESS$ -t $ARG1$ } Sample of service definition: define service{ use local-service host_name msa2012i service_description Virtual Disks check_command check_msa2012i_g1!vdisks }

You must be logged in to submit a review.

Your review has been submitted and is pending approval.

Your recommendation has been sent.

Project Overview Project Files Project Photos Project Notes Reviews