check_brocade_chassis

Tested on Brocade XMR (T5.2.00D), should also run on MLX-E and other models. At the top just configure theses options: - SNMP Community - Temperature Critical Value - location of snmpwalk binary Be sure you have implemented the Foundry MIB Files on your system. Then you got an output like that: Power Suppply 1 normal operation Power Suppply 2 normal operation Power Suppply 3 normal operation Fan 1 normal operation Fan 2 normal operation Fan 3 normal operation Fan 4 normal operation 39C on "Line module 1, sensor 1 temperature" 50C on "Line module 1, sensor 2 temperature" 34.5C on "Line module 1, sensor 4 temperature" 45.5C on "Line module 1, sensor 5 temperature" 49C on "Line module 2, sensor 1 temperature" 59C on "Line module 2, sensor 2 temperature" 47C on "Line module 2, sensor 4 temperature" 53C on "Line module 2, sensor 5 temperature" 35.5C on "Line module 3, sensor 1 temperature" 62.5C on "Line module 3, sensor 2 temperature" 42.5C on "Line module 4, sensor 1 temperature" 73C on "Line module 4, sensor 2 temperature" 36C on "Active management module temperature" 48C on "Active management module temperature" 40C on "Standby management module temperature" 51.5C on "Standby management module temperature" 33C on "Switch Fabric module 0, sensor 1 temperature" 40C on "Switch Fabric module 2, sensor 1 temperature"

You must be logged in to submit a review.

Your review has been submitted and is pending approval.

Your recommendation has been sent.

Project Overview Project Files Project Notes Reviews