check_storcenter

Hello, Very good job with this plugin ! We got 2 Iomega NAS : 1 ix2 1 ix2-200 Two checks have OID problems : With the ix2, the info check returns " "ix2" (No Such Object available on this agent at this OID), Uptime: 113969624 (13 days) " and the RAID check returns " RAID OK (Raid No Such Object available on this agent at this OID) " My Firmware version is 4.1.212.33882 Best Regards, Christoff

sorry Claudio for polluting your Reviews but i didn't find any other way to contact bigchief because i got an ix4-300d and i would love to see his fork published so i can Monitor it. besides that: thanks for YOUR work which as i understand was the base for his ;)

Hi, I modified some OID for best compatibility with EMC LENOVO StorCenter version. Hope it helps! ********************************************** #!/bin/bash ################################################################################# # Script: check_storcenter # # Author: Claudio Kuenzler www.claudiokuenzler.com # # Description: Plugin for Nagios (and forks) to check an EMC/Iomega # # Storcenter device with SNMP (v3). # # License: GPLv2 # # History: # # 20111010 Created plugin (types: disk, raid, cpu, mem) # # 20111011 Added info type # # 20111013.0 Corrected uptime (but device returns strange value?) # # 20111013.1 Corrected uptime (using hrSystemUptime.0 now) # # 20111020 Disk type now doesnt return CRITICAL anymore if disks missing # # 20111031 Using vqeU in mem type (if response comes with kB string) # # 20120425 Add port as variable # ################################################################################# # Usage: ./check_storcenter -H host -P port -U user -t type [-w warning] [-c critical] ################################################################################# help="check_storcenter (c) 2011 Claudio Kuenzler published under GPL license nUsage: ./check_storcenterv2 -H host -P port -U user -p password -t type [-w warning] [-c critical] nRequirements: snmpwalk, trn nOptions: t-H hostnamentt-U user (to be defined in snmp settings on Storcenter)ntt-t Type to check, see list below tt-P snmp portn tt-w Warning Threshold (optional)ntt-c Critical Threshold (optional)n nTypes: ttdisk -> Checks hard disks for their current status ttraid -> Checks the RAID status ttcpu -> Check current CPU load (thresholds possible) tthrProcessorLoad -> Check current CPU Load with OID = hrProcessorLoad ttmem -> Check current memory (RAM) utilization (thresholds possible) ttinfo -> Outputs some general information of the device" # Nagios exit codes and PATH STATE_OK=0 # define the exit code if status is OK STATE_WARNING=1 # define the exit code if status is Warning STATE_CRITICAL=2 # define the exit code if status is Critical STATE_UNKNOWN=3 # define the exit code if status is Unknown PATH=$PATH:/usr/local/bin:/usr/bin:/bin # Set path # If the following programs aren't found, we don't launch the plugin for cmd in snmpwalk tr [ do if ! `which ${cmd} 1>/dev/null` then echo "UNKNOWN: ${cmd} does not exist, please check if command exists and PATH is correct" exit ${STATE_UNKNOWN} fi done ################################################################################# # Check for people who need help - aren't we all nice ;-) if [ "${1}" = "--help" -o "${#}" = "0" ]; then echo -e "${help}"; exit 1; fi ################################################################################# # Get user-given variables while getopts "H:U:p:P:t:w:c:" Input; do case ${Input} in H) host=${OPTARG};; P) port=${OPTARG};; U) user=${OPTARG};; p) password=${OPTARG};; t) type=${OPTARG};; w) warning=${OPTARG};; c) critical=${OPTARG};; *) echo "Wrong option given. Please use options -H for host, -U for SNMP-User, -p for SNMP-Password, -P for port, -t for type, -w for warning and -c for critical" exit 1 ;; esac done ################################################################################# # Let's check that thing case ${type} in # Disk Check disk) disknames=($(snmpwalk -v 3 -u ${user} -l authNoPriv -a MD5 -A ${password} -O vqe ${host} ${port} .1.3.6.1.4.1.1139.10.4.3.1.2 | tr ' ' '-')) countdisks=${#disknames[*]} diskstatus=($(snmpwalk -v 3 -u ${user} -l authNoPriv -a MD5 -A ${password} -O vqe ${host} ${port} .1.3.6.1.4.1.1139.10.4.3.1.4 | tr '"' ' ')) diskstatusok=0 diskstatusforeign=0 diskstatusfaulted=0 diskstatusmissing=0 disknumber=0 for status in ${diskstatus[@]} do if [ $status = "NORMAL" ]; then diskstatusok=$((diskstatusok + 1)); fi if [ $status = "FOREIGN" ]; then diskstatusforeign=$((diskstatusforeign + 1)); diskproblem[${disknumber}]=${disknames[${disknumber}]}; fi if [ $status = "FAULTED" ]; then diskstatusfaulted=$((diskstatusfaulted + 1)); diskproblem[${disknumber}]=${disknames[${disknumber}]}; fi if [ $status = "MISSING" ]; then diskstatusmissing=$((diskstatusmissing + 1)); fi let disknumber++ done if [ $diskstatusforeign -gt 0 ] || [ $diskstatusfaulted -gt 0 ] then echo "DISK CRITICAL - ${#diskproblem[@]} disk(s) failed (${diskproblem[@]})"; exit ${STATE_CRITICAL}; elif [ $diskstatusmissing -gt 0 ] then echo "DISK OK - ${countdisks} disks found, ${diskstatusmissing} disks missing/empty"; exit ${STATE_OK} else echo "DISK OK - ${countdisks} disks found, no problems"; exit ${STATE_OK} fi ;; # Raid Check raid) raidstatus=$(snmpwalk -v 3 -u ${user} -l authNoPriv -a MD5 -A ${password} -O vqe ${host} ${port} .1.3.6.1.4.1.11369.10.4.1.0 | tr '"' ' ') raidtype=$(snmpwalk -v 3 -u ${user} -l authNoPriv -a MD5 -A ${password} -O vqe ${host} ${port} .1.3.6.1.4.1.11369.10.4.2.0) #echo ${raidstatus} if [ $raidstatus = "REBUILDING" ] || [ $raidstatus = "DEGRADED" ] || [ $raidstatus = "REBUILDFS" ] then echo "RAID WARNING - RAID$raidstatus"; exit ${STATE_WARNING} elif [ $raidstatus = "FAULTED" ] then echo "RAID CRITICAL - RAID$raidstatus"; exit ${STATE_CRITICAL} else echo "RAID OK (Raid $raidtype)"; exit ${STATE_OK} fi ;; # CPU Load Old version with hrProcessorLoad hrProcessorLoad) load=($(snmpwalk -v 3 -u ${user} -l authNoPriv -a MD5 -A ${password} -O vqe ${host} ${port} hrProcessorLoad)) load1=${load[0]} if [ -n "${warning}" ] || [ -n "${critical}" ] then if [ ${load1} -ge ${warning} ] && [ ${load1} -lt ${critical} ] then echo "CPU USAGE WARNING - Current load is ${load1}|load=${load1}"; exit ${STATE_WARNING} elif [ ${load1} -ge ${warning} ] && [ ${load1} -ge ${critical} ] then echo "CPU USAGE CRITICAL - Current load is ${load1}|load1=$load1"; exit ${STATE_CRITICAL} else echo "CPU USAGE OK - Current load is ${load1}|load1=${load1}"; exit ${STATE_OK} fi else echo "CPU LOAD OK - Current load is ${load1}|load1=${load1}"; exit ${STATE_OK} fi ;; # CPU Load cpu) load=($(snmpwalk -v 3 -u ${user} -l authNoPriv -a MD5 -A ${password} -O vqe ${host} ${port} .1.3.6.1.2.1.25.3.3.1.2.768)) load1=${load[0]} load1int=$(echo $load1 | awk -F '.' '{print $1}') load5=${load[1]} load15=${load[2]} if [ -n "${warning}" ] || [ -n "${critical}" ] then if [ ${load1int} -ge ${warning} ] && [ ${load1int} -lt ${critical} ] then echo "CPU LOAD WARNING - Current load is ${load1}|load1=$load1;load5=$load5;load15=$load15"; exit ${STATE_WARNING} elif [ ${load1int} -ge ${warning} ] && [ ${load1int} -ge ${critical} ] then echo "CPU LOAD CRITICAL - Current load is ${load1}|load1=$load1;load5=$load5;load15=$load15"; exit ${STATE_CRITICAL} else echo "CPU LOAD OK - Current load is ${load1}|load1=$load1;load5=$load5;load15=$load15"; exit ${STATE_OK} fi else echo "CPU LOAD OK - Current load is ${load1}|load1=$load1;load5=$load5;load15=$load15"; exit ${STATE_OK} fi ;; # Memory (RAM) usage mem) memtotal=$(snmpwalk -v 3 -u ${user} -l authNoPriv -a MD5 -A ${password} -O vqeU ${host} .1.3.6.1.2.1.25.2.3.1.5.1) memused=$(snmpwalk -v 3 -u ${user} -l authNoPriv -a MD5 -A ${password} -O vqeU ${host} .1.3.6.1.2.1.25.2.3.1.6.1) memfree=$(( $memtotal - $memused)) memusedpercent=$(expr $memused * 100 / $memtotal) memtotalperf=$(expr $memtotal * 1024) memfreeperf=$(expr $memfree * 1024) memusedperf=$(expr $memused * 1024) if [ -n "${warning}" ] || [ -n "${critical}" ] then if [ ${memusedpercent} -ge ${warning} ] && [ ${memusedpercent} -lt ${critical} ] then echo "MEMORY WARNING - Current memory usage is at $memusedpercent%|mem_total=$memtotalperf;mem_used=$memusedperf;mem_free=$memfreeperf"; exit ${STATE_WARNING} elif [ ${memusedpercent} -ge ${warning} ] && [ ${memusedpercent} -ge ${critical} ] then echo "MEMORY CRITICAL - Current memory usage is at $memusedpercent%|mem_total=$memtotalperf;mem_used=$memusedperf;mem_free=$memfreeperf"; exit ${STATE_CRITICAL} else echo "MEMORY OK - Current memory usage is at $memusedpercent%|mem_total=$memtotalperf;mem_used=$memusedperf;mem_free=$memfreeperf"; exit ${STATE_OK} fi else echo "MEMORY OK - Current memory usage is at $memusedpercent%|mem_total=$memtotalperf;mem_used=$memusedperf;mem_free=$memfreeperf"; exit ${STATE_OK} fi ;; # General Information info) uptime=$(snmpwalk -v 3 -u ${user} -l authNoPriv -a MD5 -A ${password} -O vqt ${host} ${port} .1.3.6.1.2.1.25.1.1.0) hostname=$(snmpwalk -v 3 -u ${user} -l authNoPriv -a MD5 -A ${password} -O vqt ${host} ${port} .1.3.6.1.2.1.1.5.0) description=$(snmpwalk -v 3 -u ${user} -l authNoPriv -a MD5 -A ${password} -O vqt ${host} ${port} .1.3.6.1.4.1.11369.10.1.1.0) uptimed=$(expr $uptime / 100 / 60 / 60 / 24) echo "${hostname} (${description}), Uptime: ${uptime} ($uptimed days)"; exit ${STATE_OK} ;; esac echo "Unknown error"; exit ${STATE_UNKNOWN}

Thanks to the OP for it, but now I have upgraded to the new lenovos and some features just don't work

Hi, just did a complete renew of the initial check_storcenter script: -Made it compatible with the newest Lenovo Firmware. -Exchanged Numeric SNMP with the humanreadable MIB -Added extra feature to monitor Storage Box health, too The new version is compatible with the ix4-300d Box. Other Versions may work, too. Try it out and report your experience. Contact me if you are interested in the new version. Maybee i will put it then online. Best Regards B!

Hi Napsty, on my ix12-300r OID changed to SNMPv2-SMI::enterprises.11369.10.4.1.0 (Raid Status) and SNMPv2-SMI::enterprises.11369.10.4.2.0 (Raid Type) after a firmware update. Thanks for your helpful plugin! Bye, Giuseppe

Hello I propose a new version of this plugin to work with new version of OS (Lenovo : Nota: cpu don't work with new version of Lenovo OS. Use HrProcessorLoad instead #!/bin/bash ################################################################################# # Script: check_storcenter # # Author: Claudio Kuenzler www.claudiokuenzler.com # # Description: Plugin for Nagios (and forks) to check an EMC/Iomega # # Storcenter device with SNMP (v3). # # License: GPLv2 # # History: # # 20111010 Created plugin (types: disk, raid, cpu, mem) # # 20111011 Added info type # # 20111013.0 Corrected uptime (but device returns strange value?) # # 20111013.1 Corrected uptime (using hrSystemUptime.0 now) # # 20111020 Disk type now doesnt return CRITICAL anymore if disks missing # # 20111031 Using vqeU in mem type (if response comes with kB string) # # 20120425 Add port as variable # ################################################################################# # Usage: ./check_storcenter -H host -P port -U user -t type [-w warning] [-c critical] ################################################################################# help="check_storcenter (c) 2011 Claudio Kuenzler published under GPL license nUsage: ./check_storcenterv2 -H host -P port -U user -t type [-w warning] [-c critical] nRequirements: snmpwalk, trn nOptions: t-H hostnamentt-U user (to be defined in snmp settings on Storcenter)ntt-t Type to check, see list below tt-P snmp portn tt-w Warning Threshold (optional)ntt-c Critical Threshold (optional)n nTypes: ttdisk -> Checks hard disks for their current status ttraid -> Checks the RAID status ttcpu -> Check current CPU load (thresholds possible) tthrProcessorLoad -> Check current CPU Load with OID = hrProcessorLoad ttmem -> Check current memory (RAM) utilization (thresholds possible) ttinfo -> Outputs some general information of the device" # Nagios exit codes and PATH STATE_OK=0 # define the exit code if status is OK STATE_WARNING=1 # define the exit code if status is Warning STATE_CRITICAL=2 # define the exit code if status is Critical STATE_UNKNOWN=3 # define the exit code if status is Unknown PATH=$PATH:/usr/local/bin:/usr/bin:/bin # Set path # If the following programs aren't found, we don't launch the plugin for cmd in snmpwalk tr [ do if ! `which ${cmd} 1>/dev/null` then echo "UNKNOWN: ${cmd} does not exist, please check if command exists and PATH is correct" exit ${STATE_UNKNOWN} fi done ################################################################################# # Check for people who need help - aren't we all nice ;-) if [ "${1}" = "--help" -o "${#}" = "0" ]; then echo -e "${help}"; exit 1; fi ################################################################################# # Get user-given variables while getopts "H:U:P:t:w:c:" Input; do case ${Input} in H) host=${OPTARG};; P) port=${OPTARG};; U) user=${OPTARG};; t) type=${OPTARG};; w) warning=${OPTARG};; c) critical=${OPTARG};; *) echo "Wrong option given. Please use options -H for host, -U for SNMP-User, -P for port, -t for type, -w for warning and -c for critical" exit 1 ;; esac done ################################################################################# # Let's check that thing case ${type} in # Disk Check disk) disknames=($(snmpwalk -v 3 -u ${user} -l authNoPriv -a MD5 -A ${user} -O vqe ${host}${port} .1.3.6.1.4.1.1139.10.4.3.1.2 | tr ' ' '-')) countdisks=${#disknames[*]} diskstatus=($(snmpwalk -v 3 -u ${user} -l authNoPriv -a MD5 -A ${user} -O vqe ${host}${port} .1.3.6.1.4.1.1139.10.4.3.1.4 | tr '"' ' ')) diskstatusok=0 diskstatusforeign=0 diskstatusfaulted=0 diskstatusmissing=0 disknumber=0 for status in ${diskstatus[@]} do if [ $status = "NORMAL" ]; then diskstatusok=$((diskstatusok + 1)); fi if [ $status = "FOREIGN" ]; then diskstatusforeign=$((diskstatusforeign + 1)); diskproblem[${disknumber}]=${disknames[${disknumber}]}; fi if [ $status = "FAULTED" ]; then diskstatusfaulted=$((diskstatusfaulted + 1)); diskproblem[${disknumber}]=${disknames[${disknumber}]}; fi if [ $status = "MISSING" ]; then diskstatusmissing=$((diskstatusmissing + 1)); fi let disknumber++ done if [ $diskstatusforeign -gt 0 ] || [ $diskstatusfaulted -gt 0 ] then echo "DISK CRITICAL - ${#diskproblem[@]} disk(s) failed (${diskproblem[@]})"; exit ${STATE_CRITICAL}; elif [ $diskstatusmissing -gt 0 ] then echo "DISK OK - ${countdisks} disks found, ${diskstatusmissing} disks missing/empty"; exit ${STATE_OK} else echo "DISK OK - ${countdisks} disks found, no problems"; exit ${STATE_OK} fi ;; # Raid Check raid) raidstatus=$(snmpwalk -v 3 -u ${user} -l authNoPriv -a MD5 -A ${user} -O vqe ${host}${port} .1.3.6.1.4.1.1139.10.4.1.0 | tr '"' ' ') raidtype=$(snmpwalk -v 3 -u ${user} -l authNoPriv -a MD5 -A ${user} -O vqe ${host}${port} .1.3.6.1.4.1.1139.10.4.2.0) #echo ${raidstatus} if [ $raidstatus = "REBUILDING" ] || [ $raidstatus = "DEGRADED" ] || [ $raidstatus = "REBUILDFS" ] then echo "RAID WARNING - RAID$raidstatus"; exit ${STATE_WARNING} elif [ $raidstatus = "FAULTED" ] then echo "RAID CRITICAL - RAID$raidstatus"; exit ${STATE_CRITICAL} else echo "RAID OK (Raid $raidtype)"; exit ${STATE_OK} fi ;; # CPU Load Old version with hrProcessorLoad hrProcessorLoad) load=($(snmpwalk -v 3 -u ${user} -l authNoPriv -a MD5 -A ${user} -O vqe ${host}${port} hrProcessorLoad)) load1=${load[0]} if [ -n "${warning}" ] || [ -n "${critical}" ] then if [ ${load1} -ge ${warning} ] && [ ${load1} -lt ${critical} ] then echo "CPU USAGE WARNING - Current load is ${load1}|load=${load1}"; exit ${STATE_WARNING} elif [ ${load1} -ge ${warning} ] && [ ${load1} -ge ${critical} ] then echo "CPU USAGE CRITICAL - Current load is ${load1}|load1=$load1"; exit ${STATE_CRITICAL} else echo "CPU USAGE OK - Current load is ${load1}|load1=${load1}"; exit ${STATE_OK} fi else echo "CPU LOAD OK - Current load is ${load1}|load1=${load1}"; exit ${STATE_OK} fi ;; # CPU Load cpu) load=($(snmpwalk -v 3 -u ${user} -l authNoPriv -a MD5 -A ${user} -O vqe ${host}${port} .1.3.6.1.4.1.2021.10.1.3)) load1=${load[0]} load1int=$(echo $load1 | awk -F '.' '{print $1}') load5=${load[1]} load15=${load[2]} if [ -n "${warning}" ] || [ -n "${critical}" ] then if [ ${load1int} -ge ${warning} ] && [ ${load1int} -lt ${critical} ] then echo "CPU LOAD WARNING - Current load is ${load1}|load1=$load1;load5=$load5;load15=$load15"; exit ${STATE_WARNING} elif [ ${load1int} -ge ${warning} ] && [ ${load1int} -ge ${critical} ] then echo "CPU LOAD CRITICAL - Current load is ${load1}|load1=$load1;load5=$load5;load15=$load15"; exit ${STATE_CRITICAL} else echo "CPU LOAD OK - Current load is ${load1}|load1=$load1;load5=$load5;load15=$load15"; exit ${STATE_OK} fi else echo "CPU LOAD OK - Current load is ${load1}|load1=$load1;load5=$load5;load15=$load15"; exit ${STATE_OK} fi ;; # Memory (RAM) usage mem) memtotal=$(snmpwalk -v 3 -u ${user} -l authNoPriv -a MD5 -A ${user} -O vqeU ${host}${port} .1.3.6.1.4.1.2021.4.5.0) memfree=$(snmpwalk -v 3 -u ${user} -l authNoPriv -a MD5 -A ${user} -O vqeU ${host}${port} .1.3.6.1.4.1.2021.4.6.0) memused=$(( $memtotal - $memfree)) memusedpercent=$(expr $memused * 100 / $memtotal) memtotalperf=$(expr $memtotal * 1024) memfreeperf=$(expr $memfree * 1024) memusedperf=$(expr $memused * 1024) if [ -n "${warning}" ] || [ -n "${critical}" ] then if [ ${memusedpercent} -ge ${warning} ] && [ ${memusedpercent} -lt ${critical} ] then echo "MEMORY WARNING - Current memory usage is at $memusedpercent%|mem_total=$memtotalperf;mem_used=$memusedperf;mem_free=$memfreeperf"; exit ${STATE_WARNING} elif [ ${memusedpercent} -ge ${warning} ] && [ ${memusedpercent} -ge ${critical} ] then echo "MEMORY CRITICAL - Current memory usage is at $memusedpercent%|mem_total=$memtotalperf;mem_used=$memusedperf;mem_free=$memfreeperf"; exit ${STATE_CRITICAL} else echo "MEMORY OK - Current memory usage is at $memusedpercent%|mem_total=$memtotalperf;mem_used=$memusedperf;mem_free=$memfreeperf"; exit ${STATE_OK} fi else echo "MEMORY OK - Current memory usage is at $memusedpercent%|mem_total=$memtotalperf;mem_used=$memusedperf;mem_free=$memfreeperf"; exit ${STATE_OK} fi ;; # General Information info) uptime=$(snmpwalk -v 3 -u ${user} -l authNoPriv -a MD5 -A ${user} -O vqt ${host}${port} .1.3.6.1.2.1.25.1.1.0) hostname=$(snmpwalk -v 3 -u ${user} -l authNoPriv -a MD5 -A ${user} -O vqt ${host}${port} .1.3.6.1.2.1.1.5.0) description=$(snmpwalk -v 3 -u ${user} -l authNoPriv -a MD5 -A ${user} -O vqt ${host}${port} .1.3.6.1.4.1.1139.10.1.1.0) uptimed=$(expr $uptime / 100 / 60 / 60 / 24) echo "${hostname} (${description}), Uptime: ${uptime} ($uptimed days)"; exit ${STATE_OK} ;; esac echo "Unknown error"; exit ${STATE_UNKNOWN}

Hi, I change OID for CPU in script. Old line : load=($(snmpwalk -v 3 -u ${user} -O vqe ${host} .1.3.6.1.4.1.2021.10.1.3)) Output with old line : CPU LOAD OK - Current load is No|load1=No;load5=Such;load15=Object New : load=($(snmpwalk -v 3 -u ${user} -O vqe ${host} .1.3.6.1.2.1.25.3.3.1.2.768)) Output with new line : CPU LOAD OK - Current load is 100|load1=100;load5=;load15= I hope this will help someone Tested with StorCenter ix2-200 v. 2.1.42.18967 Good job to developper Sorry for my english.

Hi! I tested on my ix2-200 at office and the memory error ocurrs. After i checked OIDs from the memory check, i found differences, changin and now it's working fine now. I modified the code, excanging memfree and memused and collected different OID memtotal: .1.3.6.1.2.1.25.2.3.1.5.1 memused : .1.3.6.1.2.1.25.2.3.1.6.1 Old code: mem) memtotal=$(snmpwalk -v 3 -u ${user} -O vqeU ${host} .1.3.6.1.4.1.2021.4.5.0) memfree=$(snmpwalk -v 3 -u ${user} -O vqeU ${host} .1.3.6.1.4.1.2021.4.11.0) memused=$(( $memtotal - $memfree)) - New code: mem) memtotal=$(snmpwalk -v 3 -u ${user} -O vqeU ${host} .1.3.6.1.2.1.25.2.3.1.5.1) memused=$(snmpwalk -v 3 -u ${user} -O vqeU ${host} .1.3.6.1.2.1.25.2.3.1.6.1) memfree=$(( $memtotal - $memused)) Hope it helps you, and thanks for this nice plugin!

Hi! I also tested on ix4-200d and the memory error ocurrs. But, I compared and changed the OID from the memory check, so it's working fine now. Here's the new one: * Size: .1.3.6.1.2.1.25.2.3.1.5.1 * Used: .1.3.6.1.2.1.25.2.3.1.6.1 Although, by the MIB file that came with it, your values are supposed to work. Hope it helps you, and thanks for this nice plugin!

Tested on Iomega StorCenter ix4-200d. Working for Disk, Raid, Info and cpu Error with mem : ./check_storcenter.pl: line 135: No Such Object available on this agent at this OID - No Such Object available on this agent at this OID: syntax error in expression (error token is "Such Object available on this agent at this OID - No Such Object available on this agent at this OID") Unknown error Any idea ?