check_equallogic

Please find the plugin here: http://www.claudiokuenzler.com/nagios-plugins/check_equallogic.php ** Version history ** ---------------------------------------------------- 20091109 Started Script programming checks: health, disk, raid, uptime, ps, info 20091112 Added ethif, conn 20091118 Added diskusage 20091119 Bugfix on Outputs (removed Pipes) 20091121 Public Release 20091204 Bugfix (removed IP addresses) 20091206 Bugfix (removed SNMP community names) 20091222 Fixed raid, ps, health and diskusage checks when multiple member devices exists. Mathias Sundman 20100112 Successful tests on PS5000XV - thanks to Scott Sawin 20100209 Compatibility matrix now on website (see Tested on above) 20100416 Beta Testing for rewritten ethif check 20100420 Corrected ethif output, finished new ethif check 20100526 Using proper order of snmpwalk command, thanks Roland Ripoll 20100531 Added perfdata for diskusage and connections, thx to Benoit 20100630 Corrected perfdata output (+added thresholds), thx Christian 20100809 Fixed conn type -> total of all eql members of group 20101026 /bin/sh back to /bin/bash (Ubuntu problems with /bin/dash) 20101026 Bugfix snmpwalk (vqe instead of vq), thanks Fabio Panigatti 20101102 Added fan 20101202 Added volumes (checks utilization of all volumes) 20110315 Bugfix in fan warning, diskusage output changed 20110323 Mysteriously disappeared temp check type added again 20110328 Beta Testing for etherrors check by Martin Conzelmann 20110404 Added thresholds to etherrors check by Martin Conzelmann 20110404 Bugfix in volumes check 20110407 New temp check - more information in output. M. Conzelmann 20110725 New disk check by Amir Shakoor (Bugfixes by Claudio Kuenzler) 20110804 New poolusage check by Chris Funderburg and Markus Becker 20110808 New vol check - checks single volume for utilization 20111013 Bugfix in vol check for similar vol names by Matt White 20111031 Bugfix in ethif check for int response by Francois Borlet 20120104 Bugfix in temp check if only one controller available 20120104 Bugfix in info check if only one controller available 20120123 Bugfix in volumes check 20120125 Added perfdata in volumes check, volume names now w/o quotes 20120319 Added poolconn check by Erwin Bleeker 20120330 Rewrite of poolusage (orig is now: memberusage) by E. Bleeker 20120405 Bugfix in poolusage to show result without thresholds 20120430 Added snapshots type by Roland Penner 20120503 Rewrite of info check (Fix for multiple members, FW Check) 20120815 Added percentage of raid rebuild when raid reconstructing 20120821 Minor bugfix in vol/volumes check (added space in perfdata) 20120911 Added percentage of raid rebuild when raid expanding 20120913 Bugfix in percentage output in raid check 20121204 Added percentage of raid rebuild when raid verifying 20121204 Changed raid percentage output when multiple members around 20121228 ps type now also checks for failed power supply fans 20130728 Added copy to spare raid status by Peter Lieven 20131024 Bugfix in temp check (Backplane_sensor_0 was not shown) 20131025 Optical cleanup 20131122 Bugfix in vol check when volumes spread across members 20131219 Bugfix in poolusage check when a pool was not used (0 size) 20140626 Bugfix in etherrors check 20140711 Added snmp connection check function 20150203 Bugfix in vol check in percentage calculation 20151006 Bugfix in vol check if volume not found by Stephane Loeuillet 20151126 Bugfix in memberusage and poolusage checks (missing newline) # ** Compatibility ** ---------------------------------------------------- The plugin has been successfully tested on the following Dell Equallogic devices: [Please see up to date table on http://www.claudiokuenzler.com/nagios-plugins/check_equallogic.php] ** Requirements ** ---------------------------------------------------- - The following shell commands must exist and be executable by your Nagios user: snmpwalk, awk, grep, wc - SNMP must be enabled on the Dell Equallogic device. If it is not already, enable it on the member. ** Definition of parameters ** ---------------------------------------------------- -H Hostname or IP address of Equallogic to check -C SNMP Communityname (must be at least readable) -t Type of check you want to do (see the definition of types further down) -v Name of single volume to check [-w] Warning threshold (optional and only in combination with certain types) [-c] Critical threshold (optional and only in combination with certain types) --help Help text for correct usage of this script ** Definition of the check types ** ---------------------------------------------------- conn -> Checks number of current ISCSI connections (thresholds possible) disk -> Checks Status of all disks diskusage -> Checks how much raid space is already used (thresholds possible) etherrors -> Checks ethernet interfaces for ethernet packet errors ethif -> Checks status of ethernet interfaces (thresholds possible) fan -> Checks status of fans health -> Checks overall health of Equallogic device info -> Shows general information of Equallogic device memberusage -> Shows disk utilisation of all members of the same group (thresholds possible) poolconn -> Check highest number of ISCSI connections per pool (thresholds possible) poolusage -> Checks utilization of pools (thresholds possible) ps -> Checks status of power supply(ies) raid -> Checks RAID status snapshots -> Checks Snapshot Reserve status (warning level is taken from the equallogic volume config, critical level can be set with -c ) temp -> Checks temperature sensors uptime -> Shows uptime of Equallogic device vol -> Checks a single volume, must be used with -v option (thresholds possible) volumes -> Checks utilization of all created ISCSI volumes (thresholds possible)

You must be logged in to submit a review.

Your review has been submitted and is pending approval.

Your recommendation has been sent.

Project Overview Project Photos Project Notes Reviews