Cisco – Check Juniper SA – SNMP v1, v2c, v3

This script check Juniper SA (tested on Juniper SA-4500). Modules included : ### Mode 1 - Disk ### # - check Disk and log file status # => warning or critical if used too much ### Mode 2 - Memory ### # - check memory used # => warning or critical if used too much ### Mode 3 - Users ### # - check number of users connected # => warning or critical if too much users connected check_snmp_juniper_sa.sh -H hostname -V version -M mode [-w|-c|-C|-l|-u|-a|-m|-d|-h] ### PARAMETERS ### -H (IP adresse or DNS name) -V (1|2c|3) -M (disk|memory|users) ### OPTIONNAL ### -w *** Use on disk|memory|users mode *** -c *** Use on disk|memory|users mode *** -C (name) *** Use on Version 1|2 *** -l (NoAuthNoPriv | AuthNoPriv | AuthPriv) *** Use on Version 3 *** -u *** Use on Version 3 *** -a *** Use on Version 3 *** -m *** Use on users mode *** -d Debug mode -h Help (print command usage, and quit) Sample commands: #./check_snmp_juniper_sa.sh -H 192.168.0.1 -V 1 -M disk -C Public -w 80 -c 90 OK - Disk used : 3% - Log file full : 2% | Used=3 log=2 Max=100 #./check_snmp_juniper_sa.sh -H 192.168.0.1 -V 2c -M memory -C Public -w 50 -c 90 Warning - Memory used : 56% - Swap used : 12% | Used=56 swap=12 Max=100 #./check_snmp_juniper_sa.sh -H 192.168.0.1 -V 2c -M users -C Public -w 80 -c 90 -m 100 OK - Users connected : 1/100 | Users=1 Max=100 #./check_snmp_juniper_sa.sh -h Display help #./check_snmp_juniper_sa.sh xxxxxx -d Active debug mod

You must be logged in to submit a review.

Your review has been submitted and is pending approval.

Your recommendation has been sent.

Project Overview Project Files Project Notes Reviews