APAN check mem usage and check net usage

MEM_USAGE: 0 and 30 are two percentages. If you use more than 0% of your MemTotalSwap plugin generates a warning and if you use more than 30% of emTotalSwap plugin generates a critical. If you don\\\'t use swap state is OK. define service{ use generic-service host_name x service_description memory-usage-2 is_volatile 0 contact_groups tests check_command apan!control_snmp!0!30 } NET USAGE: There are two values of bandwith that determine if you have a warning or a critical # max1= 50kBs max2= 150kBs define service{ use generic-service host_name x service_description net-usage-2 is_volatile 0 contact_groups tests check_command apan!control_snmp_net!51300!153600 normal_check_interval 3 } You have to add the plugin where you have the other plugins of apan, in my case (/usr/local/nagios/apan/plugs). An in the config file of apan (apan.sh in my case in /usr/local/nagios/apan): control_snmp) snmp_memory $5 $6 ;; control_snmp_net) snmp_net $5 $6 ;; I use this oids with a DELL PowerEdge, but you can use these plugin for other issues, only changing the oid's that you pass. APAN.CFG (/etc/nagios): server_name;memory-usage-2;/var/rrd/server-name_mem-usage-2.rrd;COMMUNITY:.1.3.6.1.4.1.2021.4.6.0|COMMUNITY:.1.3.6.1.4.1.2021.4.13.0| COMMUNITY:.1.3.6.1.4.1.2021.4.14.0|COMMUNITY:.1.3.6.1.4.1.2021.4.15.0| COMMUNITY:.1.3.6.1.4.1.2021.4.4.0|COMMUNITY:.1.3.6.1.4.1.2021.4.3.0;memAvailReal:LINE2 memShared:LINE2 memBuffer:LINE2 memCached:LINE2 memAvailSwap:LINE2 memTotalSwap:LINE2;MemFree;MB server_name;net-usage;/var/rrd/server-name_net-usage-2.rrd;COMMUNITY:.1.3.6.1.2.1.2.2.1.10.2|COMMUNITY:.1.3.6.1.2.1.2.2.1.16.2; IN:LINE2 OUT:LINE2;Network throughput;Bytes/sek;

You must be logged in to submit a review.

Your review has been submitted and is pending approval.

Your recommendation has been sent.

Project Overview Project Files Project Notes Reviews